Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi

A-Tech

A-Tech 8GB DDR5 4800MHz CL40 288-Pin 1.1V Desktop RAM

SKU CH-6DDT-ZJJCT

An 8 GB DDR5 4800 MHz desktop DIMM with CL40 latency and 1.1 V operation for faster multitasking

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCNo

Speed DDR5 4800 (PC5 38400)

CAS Latency CL40

Color Green

  • Green
  • Green/Black

Le versioni barrate esistono, ma non sono disponibili qui.

  • 8GB capacity lets you run more programs at once
  • DDR5 4800MHz speed moves data faster than DDR4
  • CL40 latency at 1.1V balances response time and efficiency
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Non-ECC unbuffered design keeps cost low for everyday workloads

8GB DDR5 4800MHz Desktop Module

This 8GB DDR5 DIMM runs at 4800MHz with a CL40 latency and operates at the standard 1.1V. The unbuffered, non-ECC design uses a 288-pin layout and carries major-brand DRAM chips. It is built for desktop systems that support DDR5 memory.

Upgrade from DDR4 1.2V platforms

Moving from DDR4 at 1.2V to this DDR5 module drops the operating voltage to 1.1V and doubles the channel architecture per DIMM. The jump is worth it when your motherboard and CPU support DDR5 and you need the extra bandwidth for heavier multitasking or faster data throughput.

Suits DDR5 desktop builders and upgraders

This single 8GB stick fits users adding capacity to a DDR5-compatible board or starting a new build with one module. Buyers whose systems only accept DDR4, or who need ECC or registered memory, should look at a different product.

Punti di forza

  • 8GB capacity lets you run more programs at once
  • DDR5 4800MHz speed moves data faster than DDR4
  • CL40 latency at 1.1V balances response time and efficiency
  • 288-pin UDIMM fits standard desktop DDR5 slots
  • Non-ECC unbuffered design keeps cost low for everyday workloads

Caratteristiche tecniche

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS LatencyCL40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
ColorGreen
Heat SpreaderNo
Recommend UseAMD & Intel Compatible

Altre versioni di questo modello

altri 5 nella stessa gamma

Stessa famiglia, con memoria, dissipatore o frequenza diversi — confronti prima di decidere.

Domande su questo articolo

Will the 288-pin DDR5 module fit my motherboard's DIMM slots?

The stick uses the standard 288-pin DDR5 DIMM form factor, so it fits any desktop board with DDR5 slots; DDR4 slots are keyed differently and will not accept it.

What is the correct way to seat the module, and what step do builders often miss?

Align the notch with the slot key, press straight down until both side clips click, and verify the clips are fully locked — skipping the click check is the common mistake.

Does the lack of a heat spreader mean I need to add cooling later?

No extra cooling is required; the module runs at the standard 1.1 V DDR5 voltage without a spreader and is rated for continuous operation as shipped.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.