Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board with black memory chips and gold contacts, no heat spreader

A-Tech

A-Tech Supermicro Certified 8GB DDR4 2133MHz Desktop RAM

SKU CH-5NDK-3DC79

An 8 GB DDR4 DIMM running at 2133 MHz with CL15 latency and 1.2 V operation, certified for Supermicro systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • Supermicro certified for guaranteed compatibility in approved systems
  • Micron chipset delivers reliable DDR4 2133MHz performance at CL15 latency
  • 8GB dual-rank module handles multitasking workloads with ease
  • 20V standard voltage keeps power draw low and stable
  • 288-pin DIMM fits desktop boards designed for DDR4 memory

8GB DDR4 2133MHz Desktop Module

This A-Tech module is an 8GB DDR4 2133MHz DIMM built with Micron components and validated as Supermicro Certified MEM-DR480L-CL02-UN21. It runs at 1.20V with CL15 latency in a 2Rx8 unbuffered layout. The 288-pin form factor fits standard desktop DIMM slots.

Suits Supermicro Systems Only

Choose this kit when your Supermicro documentation lists MEM-DR480L-CL02-UN21 as supported memory. It is not intended for platforms that require ECC or registered modules. Buyers needing error correction or server-qualified registered DIMMs should select a different part.

Certified Supermicro Part Number Decides Fit

The single specification that determines compatibility is the Supermicro part number MEM-DR480L-CL02-UN21. Verify this exact identifier against your system's qualified vendor list before purchase. No other speed, voltage or capacity variation substitutes for this certification.

Fordele

  • Supermicro certified for guaranteed compatibility in approved systems
  • Micron chipset delivers reliable DDR4 2133MHz performance at CL15 latency
  • 8GB dual-rank module handles multitasking workloads with ease
  • 20V standard voltage keeps power draw low and stable
  • 288-pin DIMM fits desktop boards designed for DDR4 memory

Specifikationer

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR480L-CL02-UN21
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMicron Chipset
Heat SpreaderNo
FeaturesSupermicro Certified MEM-DR480L-CL02-UN21 (MTA16ATF1G64AZ-2G1A2)
Recommend UseCompatible Supermicro Systems

Spørgsmål om denne vare

Do I need a motherboard with DDR4 288-pin DIMM slots to install this module?

Yes, this 8GB stick uses the DDR4 288-pin DIMM form factor and requires a desktop motherboard with matching DDR4 slots.

Can I mix this 2133MHz CL15 1.2V module with older DDR4 sticks that run at different speeds or timings?

The system will downclock all modules to the lowest common speed and loosest timings; matching voltage at 1.2V helps stability but identical specs give best results.

How can I verify the RAM is running at the rated 2133MHz after installation?

Check the memory frequency in BIOS/UEFI or use a tool like CPU-Z; it should show 2133MHz (PC4-17000) with CL15 timings at 1.2V.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.