ASRock Rack 2U4N-F/C621-M3 2U 4-node barebone server
- 2U Rackmount
- Supports 2nd/1st Ge…
Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.
ASRock Rack
A 1U rackmount barebone supporting AMD EPYC 7002 and 7003 processors with 8 DIMM slots, 10 Gigabit LAN, four hot-swap 3.5-inch bays and a 600W Platinum power supply
The ASRock Rack 1U4LW-ROME/2T is a 1U rackmount server barebone designed for general-purpose deployments. It accepts a single AMD EPYC 7002 or 7003 series processor in a Socket SP3 socket. No CPU or memory is installed, so the buyer provides both.
This platform suits integrators building a single-processor server that needs front-accessible 3.5-inch hot-swap bays and internal 2.5-inch SATA bays. It is not for buyers who need dual-processor support, more than one full-height half-length PCIe 4.0 x16 slot, or 10 Gigabit Ethernet beyond the two onboard ports.
The chassis supports a maximum of one processor, fixing the compute ceiling at a single EPYC CPU. That constraint decides whether the barebone matches the intended workload.
| Brand | ASRock Rack |
|---|---|
| Model | 1U4LW-ROME/2T |
| Form Factor | 1U Rackmount |
| Workload | General Purpose Server |
| CPU Type | Support AMD EPYC 7003* and 7002 Series Processors *A BIOS update is required to support AMD EPYC 7003 Series Processors. |
| CPU Socket | Socket SP3 |
| Installed CPU | No CPU Installed |
| Max Processors | 1 |
| Memory Slots | 8 DIMM slots (1DPC) |
| Installed Memory Size | No Memory Installed |
| Memory Type Supported | RDIMM/ LRDIMM: up to 3200 MHz NVDIMM: up to 2666 MHz |
| Installed HDD | No Storage Installed |
| GPU/VPU | Aspeed AST2500 |
| PCI Express | Rear: 1 FHHL PCIe4.0 x16 |
| First LAN | Intel X710-AT2 |
| Max. LAN Speed | 10 Gigabit |
| 2.5" Bays | 3 x Fixed 2.5'' SATA Internal drive bays |
| Hot-Swap Bays | 4 x Hot-swap 3.5'' SATA External drive bays |
| Front USB | 2 x USB 3.0 |
| COM | 1 x DB9 |
| VGA | 1 |
| Rear USB | 2 x USB 3.2 Gen1 |
| RJ45 | 2 x RJ45 (10GbE) by Intel X710-AT2 1 x Dedicated IPMI |
| Max. Power | Single PSU, 600W, 80-PLUS Platinum |
| Dimensions | 1.75" x 19.00" x 21.00" |
| Forsendelsesvægt | 20.41 kg |
| Pakkestørrelse | 711 × 660 × 203 mm |
Both series fit the SP3 socket, but the 7003 series requires a BIOS update before it will boot. If you want to avoid that step, select a 7002 series CPU; otherwise plan the update first.
The Intel X710-AT2 controller provides two RJ45 ports that each negotiate up to 10 Gb/s over copper cabling, so throughput is limited by the 10 GbE link and the PCIe 4.0 x16 slot it occupies.
The single full-height half-length slot runs at PCIe 4.0 x16 electrical, so any add-in card is limited to that generation and lane width; the slot shares the CPU root complex, so total bandwidth cannot exceed the x16 ceiling.
Også på denne hylde
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Det du betaler med, og det du ser priserne i.
Sendes fra din tegnebog i kassen
Kun til visning — kataloget er prissat i USD
Ingen valuta matcher det.
Vælg det sprog, siden taler til dig på.
Ingen sprog matcher.
Ny her?
Har du allerede en?
Der findes ingen automatisk nulstilling: denne butik sender ingen e-mails, så der er intet engangslink at bede om. Efterlad adressen på kontoen, så bliver den behandlet manuelt.
Anmodning registreret
Der er intet på vej til din indbakke — denne butik sender slet ingen e-mails. Nogen behandler dem manuelt.
Kom du i tanke om den?