Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 SODIMM HP Envy M6 - A7
16 GB DDR3L 1600 kit (2 × 8 GB SODIMM, CL11, 1.35 V) validated for HP Envy M6‑1203, M6‑1205 and M6‑1208 notebooks
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Timing11-11-11
- Voltage1.35V
- 16 GB kit gives headroom for multitasking
- DDR3L 1600 speed keeps data flowing
- 35 V operation reduces power draw
- CL11 timing delivers responsive access
- 204-pin SODIMM fits HP Envy M6 models
16GB DDR3L kit for HP Envy M6
This 16GB kit contains two 8GB SODIMM modules built to the DDR3L 1600 standard. It is designed as a direct memory upgrade for the HP Envy M6 models listed in the compatibility data. The modules operate at 1.35V and use the 204-pin form factor required by those notebooks.
Suits owners of the listed Envy M6 models
The kit matches the specifications for HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx systems. Builders working on other platforms or desktop boards should look elsewhere because the 204-pin DDR3L form factor and voltage are not compatible. Systems requiring ECC or registered memory will not be supported by this unbuffered non-ECC kit.
Deciding specification: DDR3L 1600 at 1.35V
The memory runs at DDR3L 1600 (PC3L 12800) with a CAS latency of 11 and timing of 11-11-11. The 1.35V operating voltage is the critical figure that distinguishes DDR3L from standard DDR3. Verify that the target notebook accepts this voltage and speed before purchasing.
Fordele
- 16 GB kit gives headroom for multitasking
- DDR3L 1600 speed keeps data flowing
- 35 V operation reduces power draw
- CL11 timing delivers responsive access
- 204-pin SODIMM fits HP Envy M6 models
Specifikationer
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246412800SODRL |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Timing | 11-11-11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp Envy M6-1203So, M6-1205Dx, M6-1205Tx, M6-1208Tx |
| Package Content | 2 Memory RAM Sticks |
Spørgsmål om denne vare
Will these 204-pin DDR3L SODIMM modules fit the memory slots in an HP Envy M6-1203So?
Yes, the kit is validated for the HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx. Each module uses the standard 204-pin DDR3L SODIMM form factor that those laptops require.
What is the correct way to seat both 8 GB sticks so the laptop recognises the full 16 GB?
Power off and unplug the laptop, remove the battery if accessible, then insert each module at an angle into a slot and press down firmly until the side clips click. The common mistake is stopping before the clips engage, leaving the stick partially seated.
When should I expect to replace these DDR3L 1600 CL11 modules?
DDR3L SODIMMs have no moving parts and no scheduled replacement interval. They are typically kept until a system upgrade requires a different memory generation or capacity.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



