Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green 204-pin DDR3L SODIMM sticks side by side

Computer Memory Solutions

Computer Memory Solutions 16GB (2x8GB) DDR3L 1600 SODIMM HP Envy M6 - A7

SKU CH-4Y4K-MGN2D

16 GB DDR3L 1600 kit (2 × 8 GB SODIMM, CL11, 1.35 V) validated for HP Envy M6‑1203, M6‑1205 and M6‑1208 notebooks

  • Capacity16GB (2 x 8GB)
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Timing11-11-11
  • Voltage1.35V
  • 16 GB kit gives headroom for multitasking
  • DDR3L 1600 speed keeps data flowing
  • 35 V operation reduces power draw
  • CL11 timing delivers responsive access
  • 204-pin SODIMM fits HP Envy M6 models

16GB DDR3L kit for HP Envy M6

This 16GB kit contains two 8GB SODIMM modules built to the DDR3L 1600 standard. It is designed as a direct memory upgrade for the HP Envy M6 models listed in the compatibility data. The modules operate at 1.35V and use the 204-pin form factor required by those notebooks.

Suits owners of the listed Envy M6 models

The kit matches the specifications for HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx systems. Builders working on other platforms or desktop boards should look elsewhere because the 204-pin DDR3L form factor and voltage are not compatible. Systems requiring ECC or registered memory will not be supported by this unbuffered non-ECC kit.

Deciding specification: DDR3L 1600 at 1.35V

The memory runs at DDR3L 1600 (PC3L 12800) with a CAS latency of 11 and timing of 11-11-11. The 1.35V operating voltage is the critical figure that distinguishes DDR3L from standard DDR3. Verify that the target notebook accepts this voltage and speed before purchasing.

Puncte forte

  • 16 GB kit gives headroom for multitasking
  • DDR3L 1600 speed keeps data flowing
  • 35 V operation reduces power draw
  • CL11 timing delivers responsive access
  • 204-pin SODIMM fits HP Envy M6 models

Specificații

BrandComputer Memory Solutions
ModelCM10246412800SODRL
Capacity16GB (2 x 8GB)
Type204-Pin DDR3 SO-DIMM
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Timing11-11-11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Envy M6-1203So, M6-1205Dx, M6-1205Tx, M6-1208Tx
Package Content2 Memory RAM Sticks

Întrebări despre acest articol

Will these 204-pin DDR3L SODIMM modules fit the memory slots in an HP Envy M6-1203So?

Yes, the kit is validated for the HP Envy M6-1203So, M6-1205Dx, M6-1205Tx and M6-1208Tx. Each module uses the standard 204-pin DDR3L SODIMM form factor that those laptops require.

What is the correct way to seat both 8 GB sticks so the laptop recognises the full 16 GB?

Power off and unplug the laptop, remove the battery if accessible, then insert each module at an angle into a slot and press down firmly until the side clips click. The common mistake is stopping before the clips engage, leaving the stick partially seated.

When should I expect to replace these DDR3L 1600 CL11 modules?

DDR3L SODIMMs have no moving parts and no scheduled replacement interval. They are typically kept until a system upgrade requires a different memory generation or capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.