Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 DIMM sticks without heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM1024642133DIMM 16GB (2x8GB) DDR4 2133MHz memory upgrade

SKU CH-E9TN-N9274

A 16 GB DDR4 kit with two 8 GB unbuffered DIMMs rated at 2133 MHz CL15 for HP Omen 870 and ProDesk 600 G2 desktops

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Timing15-15-15
  • Voltage1.2V
  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2133 MHz CL15 timing keeps data flowing smoothly
  • 2 V low-voltage operation reduces system power draw
  • Unbuffered non-ECC 288-pin DIMMs install directly in desktop slots
  • Guaranteed compatible with HP Omen 870-168d and ProDesk 600 G2 SFF/MT

16GB DDR4 kit for HP Omen and ProDesk

This 16GB kit contains two 8GB DDR4 2133MHz modules built for HP Omen Desktop 870-168d and ProDesk 600 G2 Series SFF and MT systems. It is designed for owners of those specific models who need a straightforward memory increase. The modules are non-ECC, unbuffered DIMMs with CL15 timing and 1.2V operation.

Upgrade from lower capacity or slower DDR4

The kit replaces the factory-installed memory when the system has less than 16GB total or runs at a lower DDR4 speed. The jump is worthwhile when the workload benefits from dual-channel bandwidth and the board can address the full 16GB across two slots. Systems already at the 64GB maximum or populated with four modules will not gain capacity from this two-stick kit.

Limits of the DDR4 2133 standard

DDR4 2133 sets the baseline transfer rate and the 1.2V voltage floor for this generation. The memory controller in the compatible HP platforms caps operation at this speed, so faster modules will downclock to 2133MHz. The four-slot, 64GB maximum defined for these desktops means no configuration can exceed that ceiling regardless of module density.

Fordele

  • 16 GB dual-channel kit boosts multitasking headroom
  • DDR4 2133 MHz CL15 timing keeps data flowing smoothly
  • 2 V low-voltage operation reduces system power draw
  • Unbuffered non-ECC 288-pin DIMMs install directly in desktop slots
  • Guaranteed compatible with HP Omen 870-168d and ProDesk 600 G2 SFF/MT

Specifikationer

BrandComputer Memory Solutions
ModelCM1024642133DIMM
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Timing15-15-15
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP Omen Desktop 870-168d ProDesk 600 G2 Series SFF/MT
Package Content2 Memory RAM Sticks

Spørgsmål om denne vare

Will the 288-pin DDR4 DIMMs fit the four slots in my HP ProDesk 600 G2 SFF?

Yes, each module is a standard 288-pin DDR4 DIMM and the ProDesk 600 G2 SFF has four DDR4 slots supporting up to 64 GB total.

Do I need to enable XMP or change BIOS settings to run the kit at 2133 MHz CL15?

The modules are JEDEC-standard 2133 MHz CL15 at 1.2 V, so they will run at rated speed automatically without XMP or manual timing changes.

Can I add another 16 GB kit later to reach the 64 GB maximum?

The platform supports four DIMM slots and a 64 GB ceiling, so a second identical 2×8 GB kit can be installed later to populate all four slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.