Computer Memory Solutions
Computer Memory Solutions CM1024642133DIMM 16GB (2x8GB) DDR4 2133MHz memory upgrade
A 16 GB DDR4 kit with two 8 GB unbuffered DIMMs rated at 2133 MHz CL15 for HP Omen 870 and ProDesk 600 G2 desktops
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2133 (PC4 17000)
- CAS LatencyCL15
- Timing15-15-15
- Voltage1.2V
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2133 MHz CL15 timing keeps data flowing smoothly
- 2 V low-voltage operation reduces system power draw
- Unbuffered non-ECC 288-pin DIMMs install directly in desktop slots
- Guaranteed compatible with HP Omen 870-168d and ProDesk 600 G2 SFF/MT
16GB DDR4 kit for HP Omen and ProDesk
This 16GB kit contains two 8GB DDR4 2133MHz modules built for HP Omen Desktop 870-168d and ProDesk 600 G2 Series SFF and MT systems. It is designed for owners of those specific models who need a straightforward memory increase. The modules are non-ECC, unbuffered DIMMs with CL15 timing and 1.2V operation.
Upgrade from lower capacity or slower DDR4
The kit replaces the factory-installed memory when the system has less than 16GB total or runs at a lower DDR4 speed. The jump is worthwhile when the workload benefits from dual-channel bandwidth and the board can address the full 16GB across two slots. Systems already at the 64GB maximum or populated with four modules will not gain capacity from this two-stick kit.
Limits of the DDR4 2133 standard
DDR4 2133 sets the baseline transfer rate and the 1.2V voltage floor for this generation. The memory controller in the compatible HP platforms caps operation at this speed, so faster modules will downclock to 2133MHz. The four-slot, 64GB maximum defined for these desktops means no configuration can exceed that ceiling regardless of module density.
Besonderheiten
- 16 GB dual-channel kit boosts multitasking headroom
- DDR4 2133 MHz CL15 timing keeps data flowing smoothly
- 2 V low-voltage operation reduces system power draw
- Unbuffered non-ECC 288-pin DIMMs install directly in desktop slots
- Guaranteed compatible with HP Omen 870-168d and ProDesk 600 G2 SFF/MT
Technische Daten
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642133DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2133 (PC4 17000) |
| CAS Latency | CL15 |
| Timing | 15-15-15 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP Omen Desktop 870-168d ProDesk 600 G2 Series SFF/MT |
| Package Content | 2 Memory RAM Sticks |
Fragen zu diesem Artikel
Will the 288-pin DDR4 DIMMs fit the four slots in my HP ProDesk 600 G2 SFF?
Yes, each module is a standard 288-pin DDR4 DIMM and the ProDesk 600 G2 SFF has four DDR4 slots supporting up to 64 GB total.
Do I need to enable XMP or change BIOS settings to run the kit at 2133 MHz CL15?
The modules are JEDEC-standard 2133 MHz CL15 at 1.2 V, so they will run at rated speed automatically without XMP or manual timing changes.
Can I add another 16 GB kit later to reach the 64 GB maximum?
The platform supports four DIMM slots and a 64 GB ceiling, so a second identical 2×8 GB kit can be installed later to populate all four slots.
Ebenfalls in dieser Kategorie
Kunden haben diese ebenfalls verglichen
Gleiche Abteilung, gleiche Kasse — acht Kryptowährungen und ein für 30 Minuten fixierter Kurs.



