DELL
DELL 400-AKLY 300GB 2.5" SAS 10K 12Gb/s internal hard drive
A 300 GB, 10 000 RPM SAS hard drive in a 2.5 inch hot-swap form factor for Dell systems
- PackagingBare Drive
- InterfaceSAS 3Gb/s
- Capacity300GB
- RPM10000 RPM
- Average Latency3Gb/s
- Form Factor2.5"
- 300 GB capacity for dense data storage
- 10000 RPM spindle speed for fast access
- SAS 12 Gb/s interface for high throughput
- 5 inch form factor fits compact bays
- Hot-swap tray enables drive changes without downtime
Dell 400-AKLY SAS Hard Drive
The Dell 400-AKLY is a 300GB 2.5-inch internal hard drive built for servers and storage arrays that require a SAS interface. Its 10000 RPM spindle speed supports workloads needing faster sequential access than typical nearline drives provide.
Hot-Swap Tray Included
The drive ships in a hot-swap tray so it can be inserted or removed from a compatible bay without powering down the chassis. This reduces service time during drive replacements or capacity upgrades in RAID configurations.
SAS 3Gb/s Interface Limit
Although the product highlights a 12Gb/s transfer rate, the specification lists a SAS 3Gb/s interface and 3Gb/s average latency. The practical throughput will therefore be capped at the 3Gb/s link speed when installed in a 3Gb/s backplane or controller.
Fordele
- 300 GB capacity for dense data storage
- 10000 RPM spindle speed for fast access
- SAS 12 Gb/s interface for high throughput
- 5 inch form factor fits compact bays
- Hot-swap tray enables drive changes without downtime
Specifikationer
| Brand | Dell |
|---|---|
| Model | 400-AKLY |
| Packaging | Bare Drive |
| Interface | SAS 3Gb/s |
| Capacity | 300GB |
| RPM | 10000 RPM |
| Average Latency | 3Gb/s |
| Form Factor | 2.5" |
Spørgsmål om denne vare
Does the 2.5 inch SAS drive need a tray or bracket for hot swap replacement?
The drive is supplied as a bare unit without a tray; you will need the correct Dell hot swap tray or caddy for your server or enclosure to install and replace it.
What throughput limit appears first when the 10000 RPM drive runs sustained workloads?
The SAS interface caps at 12Gb/s, so sustained sequential transfers cannot exceed that bandwidth even though the platters spin at 10000 RPM.
How much heat and noise does the 300GB 10K SAS drive produce during all day operation?
A 10000 RPM 2.5 inch SAS drive generates noticeable heat and audible seek noise under continuous use; plan for adequate airflow in the drive bay.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
