We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small silver 2.5 inch SAS hard drive with hot swap tray

DELL

DELL 400-AKLY 300GB 2.5" SAS 10K 12Gb/s internal hard drive

SKU CH-WEKF-JFT1R

A 300 GB, 10 000 RPM SAS hard drive in a 2.5 inch hot-swap form factor for Dell systems

  • PackagingBare Drive
  • InterfaceSAS 3Gb/s
  • Capacity300GB
  • RPM10000 RPM
  • Average Latency3Gb/s
  • Form Factor2.5"
  • 300 GB capacity for dense data storage
  • 10000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits compact bays
  • Hot-swap tray enables drive changes without downtime

Dell 400-AKLY SAS Hard Drive

The Dell 400-AKLY is a 300GB 2.5-inch internal hard drive built for servers and storage arrays that require a SAS interface. Its 10000 RPM spindle speed supports workloads needing faster sequential access than typical nearline drives provide.

Hot-Swap Tray Included

The drive ships in a hot-swap tray so it can be inserted or removed from a compatible bay without powering down the chassis. This reduces service time during drive replacements or capacity upgrades in RAID configurations.

SAS 3Gb/s Interface Limit

Although the product highlights a 12Gb/s transfer rate, the specification lists a SAS 3Gb/s interface and 3Gb/s average latency. The practical throughput will therefore be capped at the 3Gb/s link speed when installed in a 3Gb/s backplane or controller.

Highlights

  • 300 GB capacity for dense data storage
  • 10000 RPM spindle speed for fast access
  • SAS 12 Gb/s interface for high throughput
  • 5 inch form factor fits compact bays
  • Hot-swap tray enables drive changes without downtime

Specifications

BrandDell
Model400-AKLY
PackagingBare Drive
InterfaceSAS 3Gb/s
Capacity300GB
RPM10000 RPM
Average Latency3Gb/s
Form Factor2.5"

Questions about this item

Does the 2.5 inch SAS drive need a tray or bracket for hot swap replacement?

The drive is supplied as a bare unit without a tray; you will need the correct Dell hot swap tray or caddy for your server or enclosure to install and replace it.

What throughput limit appears first when the 10000 RPM drive runs sustained workloads?

The SAS interface caps at 12Gb/s, so sustained sequential transfers cannot exceed that bandwidth even though the platters spin at 10000 RPM.

How much heat and noise does the 300GB 10K SAS drive produce during all day operation?

A 10000 RPM 2.5 inch SAS drive generates noticeable heat and audible seek noise under continuous use; plan for adequate airflow in the drive bay.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.