DELL
DELL 4RY5N 1.2TB 2.5" SAS 10000 RPM internal hard drive
A 1.2TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate and hot-swap tray
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1.2TB
- RPM10000 RPM
- Average Latency6Gb/s
- Form Factor2.5"
- 2 TB capacity for data-intensive workloads
- 10 000 RPM spindle speed reduces latency
- SAS interface supports 12 Gb/s transfer rate
- 5-inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
Dell 4RY5N 1.2TB SAS Drive
The Dell 4RY5N is a new 1.2TB internal hard drive with a 2.5-inch form factor. It uses a SAS interface and spins at 10000 RPM for fast data access. This drive is built for desktop systems and enterprise storage arrays that require high-speed mechanical storage. It arrives as a bare drive with hot-swap tray compatibility.
Suits SAS Bays Needing 10K Speed
This drive fits administrators upgrading or repairing Dell servers and storage enclosures that accept 2.5-inch SAS drives. The 10000 RPM spindle speed supports workloads needing quick random I/O performance. It is not for buyers who require a larger capacity than 1.2TB or a different physical form factor. Systems without a SAS backplane or controller cannot use this drive.
SAS Interface Runs at 12Gb/s
The specification that decides compatibility is the SAS interface operating at 12Gb/s transfer rate. Your host bus adapter or RAID controller must support this SAS speed to realise the drive's rated performance. The 6Gb/s average latency figure in the data sheet refers to the interface generation. Verify your system's SAS lane speed before purchasing this part.
Fordele
- 2 TB capacity for data-intensive workloads
- 10 000 RPM spindle speed reduces latency
- SAS interface supports 12 Gb/s transfer rate
- 5-inch form factor fits dense server bays
- Hot-swap tray enables drive replacement without downtime
Specifikationer
| Brand | Dell |
|---|---|
| Model | 4RY5N |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1.2TB |
| RPM | 10000 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 2.5" |
Spørgsmål om denne vare
How do I install the Dell 4RY5N 2.5" SAS drive in a hot-swap bay, and what step is often missed?
Slide the bare drive into the carrier until the SAS connector seats firmly, then lock the carrier latch; the step often missed is not pushing the drive far enough for the 12Gb/s link to negotiate.
What maintenance or replacement will the 1.2TB 10000 RPM SAS drive need later?
Mechanical HDDs like this 10K unit eventually develop bearing wear or media errors; plan to replace it when SMART reallocated-sector counts rise or latency spikes appear.
What limit appears first on the 4RY5N during sustained 12Gb/s SAS writes?
The 10000 RPM spindle caps sequential throughput around the drive's native media rate, so sustained writes hit the mechanical transfer ceiling before the 12Gb/s interface saturates.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



