We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver 2.5 inch SAS hard drive bare unit with hot-swap tray connector

DELL

DELL 4RY5N 1.2TB 2.5" SAS 10000 RPM internal hard drive

SKU CH-HXCP-GDVYX

A 1.2TB 2.5-inch SAS hard drive spinning at 10000 RPM with a 12Gb/s transfer rate and hot-swap tray

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1.2TB
  • RPM10000 RPM
  • Average Latency6Gb/s
  • Form Factor2.5"
  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed reduces latency
  • SAS interface supports 12 Gb/s transfer rate
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Dell 4RY5N 1.2TB SAS Drive

The Dell 4RY5N is a new 1.2TB internal hard drive with a 2.5-inch form factor. It uses a SAS interface and spins at 10000 RPM for fast data access. This drive is built for desktop systems and enterprise storage arrays that require high-speed mechanical storage. It arrives as a bare drive with hot-swap tray compatibility.

Suits SAS Bays Needing 10K Speed

This drive fits administrators upgrading or repairing Dell servers and storage enclosures that accept 2.5-inch SAS drives. The 10000 RPM spindle speed supports workloads needing quick random I/O performance. It is not for buyers who require a larger capacity than 1.2TB or a different physical form factor. Systems without a SAS backplane or controller cannot use this drive.

SAS Interface Runs at 12Gb/s

The specification that decides compatibility is the SAS interface operating at 12Gb/s transfer rate. Your host bus adapter or RAID controller must support this SAS speed to realise the drive's rated performance. The 6Gb/s average latency figure in the data sheet refers to the interface generation. Verify your system's SAS lane speed before purchasing this part.

Highlights

  • 2 TB capacity for data-intensive workloads
  • 10 000 RPM spindle speed reduces latency
  • SAS interface supports 12 Gb/s transfer rate
  • 5-inch form factor fits dense server bays
  • Hot-swap tray enables drive replacement without downtime

Specifications

BrandDell
Model4RY5N
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1.2TB
RPM10000 RPM
Average Latency6Gb/s
Form Factor2.5"

Questions about this item

How do I install the Dell 4RY5N 2.5" SAS drive in a hot-swap bay, and what step is often missed?

Slide the bare drive into the carrier until the SAS connector seats firmly, then lock the carrier latch; the step often missed is not pushing the drive far enough for the 12Gb/s link to negotiate.

What maintenance or replacement will the 1.2TB 10000 RPM SAS drive need later?

Mechanical HDDs like this 10K unit eventually develop bearing wear or media errors; plan to replace it when SMART reallocated-sector counts rise or latency spikes appear.

What limit appears first on the 4RY5N during sustained 12Gb/s SAS writes?

The 10000 RPM spindle caps sequential throughput around the drive's native media rate, so sustained writes hit the mechanical transfer ceiling before the 12Gb/s interface saturates.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.