Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

DELL

DELL PowerEdge R730 2U 8-Bay 2x Xeon E5-2640 v3 2.6GHz 512GB DDR4 H730 8x 600GB SAS

SKU CH-X6GP-MVGME

2U rack server with dual 8-core Xeon processors at 2.6 GHz, 512 GB DDR4 ECC memory, H730 RAID controller and ten 600 GB SAS drives

  • TypeRack
  • Rack Height2U
  • Redundant Hot-swap PowerYes
  • CPU TypeIntel Xeon
  • CPU Speed2.60 GHz
  • CPU SocketLGA 2011-3

Installed Memory Size 512GB

  • Dual 8-core Xeon E5-2640 v3 processors at 2.6 GHz with 3.4 GHz Turbo
  • 512 GB DDR4 2133 MHz registered ECC memory across 16 slots
  • PERC H730 1 GB controller supporting RAID 0, 1, 5, 6, 10, 50, 60
  • Ten 600 GB 10K SAS drives in 2.5 inch hot-swap bays
  • Quad-port X520/I350 network card with two 1 GbE and two 10 GbE SFP+ ports

Dual-socket Xeon server for virtualization

The PowerEdge R730 fits into a standard 2U rack slot and delivers two 8-core Xeon E5-2640 v3 processors running at 2.6 GHz with a 3.4 GHz turbo. Fifty-twelve gigabytes of DDR4 ECC memory are installed across 16 modules, leaving eight slots open for future expansion up to 1.5 TB. The PERC H730 controller with 1 GB cache supports RAID 0, 1, 5, 6, 10, 50 and 60 for flexible array design.

Hot-swap drive bays and redundant power simplify

Eight 2.5-inch SAS bays hold ten 600 GB 10K enterprise drives, all accessible from the front without tools. Two 750 W platinum-efficiency power supplies share the load and can be swapped while the system runs. A quad-port network daughter card adds two 1 GbE and two 10 Gb SFP+ connections, while iDRAC 8 Enterprise provides dedicated remote management over a separate interface.

Verify rack depth, rail clearance

The included Ready Rails require sufficient cabinet depth for the 2U chassis; measure your rack to confirm fit. SFP+ transceivers and compatible fibre or direct-attach cables are not supplied, so source those for the 10 Gb links. Ensure your environment can deliver the required power phase and voltage for dual 750 W supplies, and plan BIOS or firmware updates through iDRAC after installation.

Fordele

  • Dual 8-core Xeon E5-2640 v3 processors at 2.6 GHz with 3.4 GHz Turbo
  • 512 GB DDR4 2133 MHz registered ECC memory across 16 slots
  • PERC H730 1 GB controller supporting RAID 0, 1, 5, 6, 10, 50, 60
  • Ten 600 GB 10K SAS drives in 2.5 inch hot-swap bays
  • Quad-port X520/I350 network card with two 1 GbE and two 10 GbE SFP+ ports

Specifikationer

BrandDELL
SeriesPowerEdge R730
ModelR730
TypeRack
Rack Height2U
Redundant Hot-swap PowerYes
CPU TypeIntel Xeon
CPU Speed2.60 GHz
CPU SocketLGA 2011-3
Number of CPU Cores8-Core Processor
# of Processors Installed2
MAX Processors2
ChipsetIntel C610
Installed Memory Size512GB
Memory TypeDDR4
Max Memory Capacity1.5TB
Number of Memory Slots24
Storage ControllerDell Perc H730 1GB Controller
HDD InterfaceSAS
SSD (Installed)No
Raid LevelRAID 0/1/5/6/10/50/60
GPU TypeMatrox G200
Video Memory8MB
Ethernet ControllerDell Intel X520/I350 Quad Port 2x 1GbE 2x 10Gb SFP+ Network Daughter Card
LAN Ports4 x Ports
Expansion Slots1 x PCIe 3.0 x16 Slot, Single Riser Included (Riser 3)
Management PortRJ 45
Operating SystemNo
Features8 x 2.5" SATA/SAS Hot-Plug Drive Bays

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

What RAID levels does the 12Gb/s PERC H730 controller support?

The PERC H730 supports RAID 0, 1, 5, 6, 10, 50 and 60, plus pass-through mode for direct drive access.

How many 2.5-inch drive bays does the 2U chassis provide?

The chassis has eight hot-swap 2.5-inch bays and ships with eight 600GB 10K SAS drives installed.

What steps are needed to install the server in a rack?

Extend the included Ready Rails, secure them to the rack posts, slide the server onto the rails and lock the release levers; the front bezel then snaps on.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.