DELL
DELL ST91000640NSProduct 1TB 2.5" SATA 7200 RPM internal hard drive
A 1 TB, 2.5-inch SATA internal hard drive spinning at 7200 RPM with a 6 Gb/s interface, built for server workloads
- PackagingBare Drive
- InterfaceSATA
- Capacity1TB
- RPM7200 RPM
- Average Latency6Gb/s
- UsageIdeal for Servers
- 1 TB capacity stores large datasets
- 7200 RPM spindle speed accelerates data access
- SATA 600 interface delivers 6 Gb/s throughput
- 5 inch form factor fits dense server bays
- Designed for server workloads with hot-swap support
Dell 1 TB 2.5" SATA server drive
This 2.5-inch internal hard drive delivers 1 TB of storage on a SATA 600 interface. It spins at 7200 RPM and is built for server environments that need reliable capacity in a compact form factor.
Thermals noise and power in normal use
The bare drive operates at a standard 7.2K spindle speed with a SATA 600 link. In typical server workloads it runs within normal mechanical hard drive thermal and acoustic ranges without requiring special cooling.
The spec that decides fit
The drive uses a 2.5-inch SATA form factor and a 6 Gb/s interface, so it only fits bays and controllers that accept that exact combination. Builders needing a different physical size or a faster protocol must choose another part.
Fordele
- 1 TB capacity stores large datasets
- 7200 RPM spindle speed accelerates data access
- SATA 600 interface delivers 6 Gb/s throughput
- 5 inch form factor fits dense server bays
- Designed for server workloads with hot-swap support
Specifikationer
| Brand | Dell |
|---|---|
| Model | 9KW4J |
| Packaging | Bare Drive |
| Interface | SATA |
| Capacity | 1TB |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Usage | Ideal for Servers |
| Form Factor | 2.5" |
Spørgsmål om denne vare
How is the 2.5" SATA drive installed in a server bay, and what step do people get wrong?
Slide the drive into a 2.5" hot-swap tray until the SATA connector seats firmly, then lock the tray lever; the common mistake is leaving the lever unlatched so the drive disconnects under vibration.
What maintenance or replacement will the 1TB 7200 RPM drive need later?
No scheduled maintenance is required; replace the drive when SMART attributes report reallocated sectors or when the server RAID controller flags a predictive failure.
What limit appears first on the ST91000640NS during sustained writes?
The 600 MB/s SATA interface caps sustained throughput before the 7200 RPM platters reach their own sequential ceiling.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



