Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Silver 2.5 inch SATA hard drive bare circuit board visible

DELL

DELL ST91000640NSProduct 1TB 2.5" SATA 7200 RPM internal hard drive

SKU CH-2KVC-50QE0 MPN ST91000640NSProduct

A 1 TB, 2.5-inch SATA internal hard drive spinning at 7200 RPM with a 6 Gb/s interface, built for server workloads

  • PackagingBare Drive
  • InterfaceSATA
  • Capacity1TB
  • RPM7200 RPM
  • Average Latency6Gb/s
  • UsageIdeal for Servers
  • 1 TB capacity stores large datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 600 interface delivers 6 Gb/s throughput
  • 5 inch form factor fits dense server bays
  • Designed for server workloads with hot-swap support

Dell 1 TB 2.5" SATA server drive

This 2.5-inch internal hard drive delivers 1 TB of storage on a SATA 600 interface. It spins at 7200 RPM and is built for server environments that need reliable capacity in a compact form factor.

Thermals noise and power in normal use

The bare drive operates at a standard 7.2K spindle speed with a SATA 600 link. In typical server workloads it runs within normal mechanical hard drive thermal and acoustic ranges without requiring special cooling.

The spec that decides fit

The drive uses a 2.5-inch SATA form factor and a 6 Gb/s interface, so it only fits bays and controllers that accept that exact combination. Builders needing a different physical size or a faster protocol must choose another part.

Pluspunten

  • 1 TB capacity stores large datasets
  • 7200 RPM spindle speed accelerates data access
  • SATA 600 interface delivers 6 Gb/s throughput
  • 5 inch form factor fits dense server bays
  • Designed for server workloads with hot-swap support

Specificaties

BrandDell
Model9KW4J
PackagingBare Drive
InterfaceSATA
Capacity1TB
RPM7200 RPM
Average Latency6Gb/s
UsageIdeal for Servers
Form Factor2.5"

Vragen over dit artikel

How is the 2.5" SATA drive installed in a server bay, and what step do people get wrong?

Slide the drive into a 2.5" hot-swap tray until the SATA connector seats firmly, then lock the tray lever; the common mistake is leaving the lever unlatched so the drive disconnects under vibration.

What maintenance or replacement will the 1TB 7200 RPM drive need later?

No scheduled maintenance is required; replace the drive when SMART attributes report reallocated sectors or when the server RAID controller flags a predictive failure.

What limit appears first on the ST91000640NS during sustained writes?

The 600 MB/s SATA interface caps sustained throughput before the 7200 RPM platters reach their own sequential ceiling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.