Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Dynatron A50 aluminum heatsink with heatpipes and PWM fan

Dynatron

Dynatron A50 CPU cooler 280 TDP Threadripper EPYC

SKU CH-9NWV-ZFZ50

Air cooler with heatpipes and PWM fan handles up to 280 W for Threadripper and EPYC sockets

  • Designed for AMD Threadripper, EPYC and Ryzen workstations
  • Handles up to 280 W thermal load for demanding CPUs
  • Aluminium heatsink with embedded heatpipes moves heat efficiently
  • 4-pin PWM fan adjusts speed to workload automatically
  • Built for 3U server chassis and high-density systems

Dynatron A50 280 TDP SP3 Cooler

The Dynatron A50 is a CPU air cooler built for AMD Threadripper, Threadripper Pro and EPYC processors using the SP3 socket. It uses an aluminium heatsink with embedded heatpipes and a 4-pin PWM fan to dissipate up to 280 watts of thermal power. The unit is designed for 3U server chassis and workstations that need reliable active cooling.

Installation uses standard SP3 mounting

The cooler mounts directly to the SP3 socket retention mechanism with the supplied hardware, and the 4-pin PWM connector plugs into the motherboard header for automatic speed control. No additional brackets or backplates are required for the listed sockets. Ensure the 3U chassis provides enough vertical clearance for the heatsink height and that the fan cable reaches the header without strain.

Verify socket, TDP and chassis height

Confirm the motherboard uses an SP3, sWRX8, sTRX4 or TR4 socket before ordering. Check that the processor TDP does not exceed 280 watts, as the cooler is rated for that limit. Measure the available height inside your 3U or taller chassis to guarantee the heatsink fits without contacting the side panel or other components.

Fordele

  • Designed for AMD Threadripper, EPYC and Ryzen workstations
  • Handles up to 280 W thermal load for demanding CPUs
  • Aluminium heatsink with embedded heatpipes moves heat efficiently
  • 4-pin PWM fan adjusts speed to workload automatically
  • Built for 3U server chassis and high-density systems

Specifikationer

Der er endnu ikke offentliggjort specifikationer for denne vare.

Spørgsmål om denne vare

How do I confirm the 4-pin PWM fan spins and the cooler handles 280 W TDP after installation?

The 4-pin PWM fan will report its RPM in BIOS or monitoring software; under load the CPU temperature should stay within safe limits for a 280 W TDP design.

What does the package contain and do I need extra mounting hardware for SP3, sWRX8, sTRX4 or TR4?

The box includes the aluminium heatsink with embedded heatpipes and the PWM fan; all required mounting brackets for the listed sockets are supplied.

Which version should I choose for a Threadripper Pro on sWRX8 versus an EPYC on SP3?

This single model supports both platforms up to 280 W, so no separate version is needed for either socket.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.