Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

G.SKILL

G.SKILL F4-3200C16D-64GVK 64GB (2 x 32GB) DDR4 3200 desktop RAM

SKU CH-GJYP-7A694 MPN F4-3200C16D-64GVK

A 64 GB dual-channel DDR4 kit running at 3200 MT/s with CL16 timing and a 42 mm black aluminum heatspreader

  • Capacity64GB (2 x 32GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 64GB (2 x 32GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency · Color · Fan Included CL16 · Black · No

  • 64 GB dual-channel kit gives ample capacity for heavy multitasking
  • DDR4 3200 speed delivers fast data rates for demanding workloads
  • CL16 16-18-18-38 timings provide low latency response
  • 35 V operation balances performance with efficient power draw
  • 42 mm module height clears most large CPU coolers

Ripjaws V DDR4 64GB dual-channel kit

This G.SKILL Ripjaws V kit provides 64GB of DDR4 memory in a matched 2 x 32GB configuration. It is built for desktop systems that need high capacity for gaming, content creation or heavy multitasking. The modules run at DDR4 3200 with a CL16 16-18-18-38 timing profile at 1.35V. Intel XMP 2.0 support lets the firmware apply the rated speed automatically on compatible platforms.

42mm aluminium heatspreader and 288-pin layout

Each module carries a black aluminium heatspreader that stands 42mm tall, a height chosen to clear most large CPU coolers. The standard 288-pin unbuffered DIMM format fits any desktop board wired for DDR4. Because the kit is sold as a matched pair, the two sticks are validated to run together in dual-channel mode without manual tuning.

CL16 at DDR4 3200 decides fit

The decisive figure is the CAS latency of 16 cycles at the 3200 MT/s data rate. If your motherboard and CPU memory controller are rated for DDR4 3200 CL16 at 1.35V, this kit will operate at its advertised specification. If the platform only supports lower speeds or tighter timings, the modules will downclock to the highest common setting.

Fordele

  • 64 GB dual-channel kit gives ample capacity for heavy multitasking
  • DDR4 3200 speed delivers fast data rates for demanding workloads
  • CL16 16-18-18-38 timings provide low latency response
  • 35 V operation balances performance with efficient power draw
  • 42 mm module height clears most large CPU coolers

Specifikationer

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3200C16D-64GVK
Capacity64GB (2 x 32GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / B550
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390
Forsendelsesvægt0.13 kg
Pakkestørrelse191 × 137 × 13 mm

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will this 64 GB kit fit under a large CPU cooler?

The modules are 42 mm tall, which clears most oversized heatsinks.

Do I need to enable XMP to reach 3200 MT/s?

Yes, the kit ships at JEDEC defaults; enable Intel XMP 2.0 in BIOS to run the rated 16-18-18-38 timings at 1.35 V.

Is this kit validated for my Z690 DDR4 motherboard?

The kit is tested on major motherboard brands and listed for Intel Z690 DDR4, Z590, Z490 and Z390 platforms.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.