G.SKILL Ripjaws V F4-3200C16D-32GVK 32GB DDR4 desktop RAM
- 32GB (2 x 16GB)
- 288-Pin PC RAM
G.SKILL
A 64 GB dual-channel DDR4 kit running at 3200 MT/s with CL16 timing and a 42 mm black aluminum heatspreader
Capacity 64GB (2 x 32GB)
Speed DDR4 3200 (PC4 25600)
CAS Latency · Color · Fan Included CL16 · Black · No
This G.SKILL Ripjaws V kit provides 64GB of DDR4 memory in a matched 2 x 32GB configuration. It is built for desktop systems that need high capacity for gaming, content creation or heavy multitasking. The modules run at DDR4 3200 with a CL16 16-18-18-38 timing profile at 1.35V. Intel XMP 2.0 support lets the firmware apply the rated speed automatically on compatible platforms.
Each module carries a black aluminium heatspreader that stands 42mm tall, a height chosen to clear most large CPU coolers. The standard 288-pin unbuffered DIMM format fits any desktop board wired for DDR4. Because the kit is sold as a matched pair, the two sticks are validated to run together in dual-channel mode without manual tuning.
The decisive figure is the CAS latency of 16 cycles at the 3200 MT/s data rate. If your motherboard and CPU memory controller are rated for DDR4 3200 CL16 at 1.35V, this kit will operate at its advertised specification. If the platform only supports lower speeds or tighter timings, the modules will downclock to the highest common setting.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3200C16D-64GVK |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD X570 / B550 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 |
| 配送重量 | 0.13 kg |
| 梱包サイズ | 191 × 137 × 13 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
The modules are 42 mm tall, which clears most oversized heatsinks.
Yes, the kit ships at JEDEC defaults; enable Intel XMP 2.0 in BIOS to run the rated 16-18-18-38 timings at 1.35 V.
The kit is tested on major motherboard brands and listed for Intel Z690 DDR4, Z590, Z490 and Z390 platforms.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?