G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
G.SKILL
Dual-channel 16 GB kit of DDR4 3200 CL16 memory with 1.35 V operation, XMP 2.0 support and low-profile 42 mm aluminium heatspreaders for broad motherboard compatibility
Capacity 16GB (2 x 8GB)
Speed DDR4 3200 (PC4 25600)
CAS Latency · Color · Fan Included CL16 · Gray · No
This G.SKILL Ripjaws V kit provides 16GB of DDR4 desktop memory as two matched 8GB modules running at 3200 MT/s with CL16 timing. The aluminum heatspreader keeps each 42mm-high module cool while fitting under most oversized CPU coolers. Intel XMP 2.0 lets the kit load its rated speed and voltage with a single BIOS setting.
The kit is validated for Intel platforms from Z170 through Z790 DDR4 and for AMD X570, X470, B550 and B450 chipsets. Unbuffered non-ECC operation and 1.35V voltage make it a standard choice for gaming or content-creation desktops. Systems that require registered ECC memory or laptop SO-DIMM form factors cannot use this product.
The 16GB capacity is delivered as a dual-channel kit of two 8GB modules, which is the specification that determines whether the kit matches the motherboard slot count and upgrade plan. Mixing this kit with other modules is not supported by the manufacturer.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3200C16D-16GVGB |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin PC RAM |
| Speed | DDR4 3200 (PC4 25600) |
| CAS Latency | CL16 |
| Timing | 16-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Gray |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | AMD X570 / X470 / B550 / B450 Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170 |
| 配送重量 | 0.14 kg |
| 梱包サイズ | 211 × 130 × 8 mm |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
A desktop motherboard with DDR4 288-pin DIMM slots is needed; the kit runs at 3200 MT/s with timings 16-18-18-38 at 1.35V.
The 42mm height is designed for compatibility with most large air coolers, leaving sufficient clearance above the memory slots.
Enter the BIOS or use a system-information tool to confirm the memory frequency reads 3200 MT/s and the timings show 16-18-18-38.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?