Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

G.SKILL

G.SKILL F4-3200C16D-16GVGB Ripjaws V 16GB DDR4 desktop RAM

SKU CH-6V8F-FBT0V MPN F4-3200C16D-16GVGB

Dual-channel 16 GB kit of DDR4 3200 CL16 memory with 1.35 V operation, XMP 2.0 support and low-profile 42 mm aluminium heatspreaders for broad motherboard compatibility

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency · Color · Fan Included CL16 · Gray · No

  • Dual-channel 16 GB kit enables smooth multitasking with two matched 8 GB modules
  • DDR4 3200 speed and CL16 timing deliver responsive performance for gaming and creative workloads
  • Low 1.35 V operation reduces power draw and heat inside the case
  • 42 mm module height clears most oversized CPU coolers without interference
  • Intel XMP 2.0 profile applies rated speed and timings automatically in BIOS

Ripjaws V 16GB DDR4 3200 kit

This G.SKILL Ripjaws V kit provides 16GB of DDR4 desktop memory as two matched 8GB modules running at 3200 MT/s with CL16 timing. The aluminum heatspreader keeps each 42mm-high module cool while fitting under most oversized CPU coolers. Intel XMP 2.0 lets the kit load its rated speed and voltage with a single BIOS setting.

Suited for Intel Z-series

The kit is validated for Intel platforms from Z170 through Z790 DDR4 and for AMD X570, X470, B550 and B450 chipsets. Unbuffered non-ECC operation and 1.35V voltage make it a standard choice for gaming or content-creation desktops. Systems that require registered ECC memory or laptop SO-DIMM form factors cannot use this product.

Dual-channel 2 x 8GB configuration

The 16GB capacity is delivered as a dual-channel kit of two 8GB modules, which is the specification that determines whether the kit matches the motherboard slot count and upgrade plan. Mixing this kit with other modules is not supported by the manufacturer.

Kohokohdat

  • Dual-channel 16 GB kit enables smooth multitasking with two matched 8 GB modules
  • DDR4 3200 speed and CL16 timing deliver responsive performance for gaming and creative workloads
  • Low 1.35 V operation reduces power draw and heat inside the case
  • 42 mm module height clears most oversized CPU coolers without interference
  • Intel XMP 2.0 profile applies rated speed and timings automatically in BIOS

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3200C16D-16GVGB
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorGray
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / X470 / B550 / B450
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Lähetyspaino0.14 kg
Pakkauksen mitat211 × 130 × 8 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard slot is required for these 288-pin DDR4 modules?

A desktop motherboard with DDR4 288-pin DIMM slots is needed; the kit runs at 3200 MT/s with timings 16-18-18-38 at 1.35V.

Will the 42mm module height clear my existing oversized CPU cooler?

The 42mm height is designed for compatibility with most large air coolers, leaving sufficient clearance above the memory slots.

How can I verify the kit is running at its rated 3200 speed after enabling XMP 2.0?

Enter the BIOS or use a system-information tool to confirm the memory frequency reads 3200 MT/s and the timings show 16-18-18-38.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.