G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
G.SKILL
Dual-channel 16 GB DDR4 3600 kit with CL17 timing, 1.35 V operation and Intel XMP 2.0 support
Capacity 16GB (2 x 8GB)
Speed DDR4 3600 (PC4 28800)
CAS Latency · Color · Fan Included CL17 · Black · No
This G.SKILL Ripjaws V kit provides 16GB of DDR4 memory in two matched 8GB modules. It runs at DDR4 3600 with CL17 latency and 1.35V voltage. The kit targets Intel Z590, Z490, Z390, Z370 and Z270 platforms for gaming or content-creation builds.
Confirm your motherboard supports DDR4 3600 and Intel XMP 2.0 before ordering. The memory is unbuffered, non-ECC and uses standard 288-pin DIMMs. Do not mix this kit with other modules; matched kits are validated together for stability.
A 42mm black aluminium heatspreader keeps modules cool under load and fits most oversized CPU coolers. The programmed XMP 2.0 profile applies the rated 17-18-18-38 timings with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3600C17D-16GVK |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | Intel Z590 / Z490 / Z390 / Z370 / Z270 |
| Lähetyspaino | 0.13 kg |
| Pakkauksen mitat | 206 × 137 × 18 mm |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
The kit contains two 8 GB DDR4 modules with black aluminium heatspreaders, giving 16 GB total in a matched dual-channel pair. No extra parts are required for installation.
This specific kit is 16 GB (2 × 8 GB) at DDR4 3600 with CL17 17-18-18-38 timing at 1.35 V. Other capacities or frequencies are separate part numbers; select the kit that matches your motherboard's qualified vendor list and your total memory target.
With Intel XMP 2.0 enabled on a compatible Z590, Z490, Z390, Z370 or Z270 platform, the modules run at 3600 MT/s with 17-18-18-38 timings at 1.35 V. Without XMP they fall back to standard JEDEC speeds.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?