G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.
G.SKILL
Dual-channel 16 GB DDR4 3600 kit with CL17 timing, 1.35 V operation and Intel XMP 2.0 support
Capacity 16GB (2 x 8GB)
Speed DDR4 3600 (PC4 28800)
CAS Latency · Color · Fan Included CL17 · Black · No
This G.SKILL Ripjaws V kit provides 16GB of DDR4 memory in two matched 8GB modules. It runs at DDR4 3600 with CL17 latency and 1.35V voltage. The kit targets Intel Z590, Z490, Z390, Z370 and Z270 platforms for gaming or content-creation builds.
Confirm your motherboard supports DDR4 3600 and Intel XMP 2.0 before ordering. The memory is unbuffered, non-ECC and uses standard 288-pin DIMMs. Do not mix this kit with other modules; matched kits are validated together for stability.
A 42mm black aluminium heatspreader keeps modules cool under load and fits most oversized CPU coolers. The programmed XMP 2.0 profile applies the rated 17-18-18-38 timings with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3600C17D-16GVK |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | Intel Z590 / Z490 / Z390 / Z370 / Z270 |
| Sendingarþyngd | 0.13 kg |
| Stærð sendingar | 206 × 137 × 18 mm |
Aðrar útgáfur af þessari vöru
Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.
The kit contains two 8 GB DDR4 modules with black aluminium heatspreaders, giving 16 GB total in a matched dual-channel pair. No extra parts are required for installation.
This specific kit is 16 GB (2 × 8 GB) at DDR4 3600 with CL17 17-18-18-38 timing at 1.35 V. Other capacities or frequencies are separate part numbers; select the kit that matches your motherboard's qualified vendor list and your total memory target.
With Intel XMP 2.0 enabled on a compatible Z590, Z490, Z390, Z370 or Z270 platform, the modules run at 3600 MT/s with 17-18-18-38 timings at 1.35 V. Without XMP they fall back to standard JEDEC speeds.
Einnig í þessum vöruflokki
Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.
Það sem þú greiðir í, og það sem þú sérð verð í.
Sent úr veskinu þínu í greiðsluferlinu
Aðeins til skýringar — verð í vörulistanum eru í Bandaríkjadölum
Enginn gjaldmiðill passar við það.
Veldu tungumálið sem síðan talar við þig á.
Ekkert tungumál fannst.
Fyrsta heimsókn?
Áttu þegar aðgang?
Það er engin sjálfvirk endurstilling: þessi verslun sendir engan tölvupóst, svo það er enginn einnota tengill til að biðja um. Skildu netfangið eftir á aðganginum og einhver sinnir því handvirkt.
Beiðni skráð
Ekkert er á leiðinni í pósthólfið þitt — þessi verslun sendir engan tölvupóst. Einhver sinnir þessu handvirkt.
Mundir þú það?