G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.
G.SKILL
Dual-channel 16 GB DDR4 3600 kit with CL17 timing, 1.35 V operation and Intel XMP 2.0 support
Capacity 16GB (2 x 8GB)
Speed DDR4 3600 (PC4 28800)
CAS Latency · Color · Fan Included CL17 · Black · No
This G.SKILL Ripjaws V kit provides 16GB of DDR4 memory in two matched 8GB modules. It runs at DDR4 3600 with CL17 latency and 1.35V voltage. The kit targets Intel Z590, Z490, Z390, Z370 and Z270 platforms for gaming or content-creation builds.
Confirm your motherboard supports DDR4 3600 and Intel XMP 2.0 before ordering. The memory is unbuffered, non-ECC and uses standard 288-pin DIMMs. Do not mix this kit with other modules; matched kits are validated together for stability.
A 42mm black aluminium heatspreader keeps modules cool under load and fits most oversized CPU coolers. The programmed XMP 2.0 profile applies the rated 17-18-18-38 timings with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3600C17D-16GVK |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | Intel Z590 / Z490 / Z390 / Z370 / Z270 |
| Teža pošiljke | 0.13 kg |
| Velikost pošiljke | 206 × 137 × 18 mm |
Druge različice tega modela
Ista družina, različen pomnilnik, hladilnik ali takt — primerjajte, preden se odločite.
The kit contains two 8 GB DDR4 modules with black aluminium heatspreaders, giving 16 GB total in a matched dual-channel pair. No extra parts are required for installation.
This specific kit is 16 GB (2 × 8 GB) at DDR4 3600 with CL17 17-18-18-38 timing at 1.35 V. Other capacities or frequencies are separate part numbers; select the kit that matches your motherboard's qualified vendor list and your total memory target.
With Intel XMP 2.0 enabled on a compatible Z590, Z490, Z390, Z370 or Z270 platform, the modules run at 3600 MT/s with 17-18-18-38 timings at 1.35 V. Without XMP they fall back to standard JEDEC speeds.
Tudi v tem oddelku
Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.
V čem plačujete in v čem berete cene.
Poslano iz Vaše denarnice ob blagajni
Samo za prikaz — katalog je cenovno izražen v dolarjih
Nobena valuta ne ustreza.
Izberite jezik, v katerem Vam govori spletna stran.
Ni ustreznega jezika.
Prvič tu?
Že imate račun?
Samodejne ponastavitve ni: ta trgovina ne pošilja e-pošte, zato ni enkratne povezave, ki bi jo lahko zahtevali. Pustite naslov na računu — nekdo ga bo obravnaval ročno.
Zahteva zabeležena
V Vašo elektronsko pošto ne prihaja nič — ta trgovina ne pošilja nobene e-pošte. Zahteve nekdo obravnava ročno.
Ste se spomnili?