G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM
- 16GB (2 x 8GB)
- 288-Pin PC RAM
เรารับชำระด้วยคริปโต — เหรียญที่คุณถืออยู่จึงนำมาซื้อฮาร์ดแวร์ของจริงได้จ่ายด้วยคริปโต แล้วนำไปซื้อฮาร์ดแวร์ของจริง จัดส่งฟรีพร้อมประกันภัยทั่วโลก เมื่อสั่งซื้อเกิน US$399 กล่องพัสดุเรียบไม่มีตราสินค้า จัดส่งจากประเทศเยอรมนีจัดส่งฟรีพร้อมประกันภัย เมื่อสั่งซื้อเกิน US$399 อัตราแลกเปลี่ยนของคุณจะถูกล็อกไว้ 30 นาที ทันทีที่เปิดหน้าชำระเงินล็อกอัตราแลกเปลี่ยน 30 นาที สินค้าทุกชิ้นปิดผนึกจากโรงงาน ตรวจสอบหมายเลขซีเรียล และรับประกัน 24 เดือนปิดผนึกจากโรงงาน รับประกัน 24 เดือน
G.SKILL
Dual-channel 16 GB DDR4 3600 kit with CL17 timing, 1.35 V operation and Intel XMP 2.0 support
Capacity 16GB (2 x 8GB)
Speed DDR4 3600 (PC4 28800)
CAS Latency · Color · Fan Included CL17 · Black · No
This G.SKILL Ripjaws V kit provides 16GB of DDR4 memory in two matched 8GB modules. It runs at DDR4 3600 with CL17 latency and 1.35V voltage. The kit targets Intel Z590, Z490, Z390, Z370 and Z270 platforms for gaming or content-creation builds.
Confirm your motherboard supports DDR4 3600 and Intel XMP 2.0 before ordering. The memory is unbuffered, non-ECC and uses standard 288-pin DIMMs. Do not mix this kit with other modules; matched kits are validated together for stability.
A 42mm black aluminium heatspreader keeps modules cool under load and fits most oversized CPU coolers. The programmed XMP 2.0 profile applies the rated 17-18-18-38 timings with a single BIOS selection.
| Brand | G.SKILL |
|---|---|
| Series | Ripjaws V Series |
| Model | F4-3600C17D-16GVK |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3600 (PC4 28800) |
| CAS Latency | CL17 |
| Timing | 17-18-18-38 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Multi-channel Kit | Dual Channel Kit |
| BIOS/Performance Profile | Intel XMP 2.0 |
| Color | Black |
| Heat Spreader | Yes |
| Features | Overclock performance DDR4 memory designed for compatible Intel platforms. Sleek and stylish aluminum heatspreader design. Intel XMP 2.0 support. Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure. Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware. For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware. Reaching the |
| Recommend Use | Intel Z590 / Z490 / Z390 / Z370 / Z270 |
| น้ำหนักในการจัดส่ง | 0.13 kg |
| ขนาดบรรจุภัณฑ์ | 206 × 137 × 18 mm |
รุ่นอื่นในตระกูลเดียวกัน
ตระกูลเดียวกัน แต่หน่วยความจำ คูลเลอร์ หรือสัญญาณนาฬิกาต่างกัน — เปรียบเทียบก่อนตัดสินใจ
The kit contains two 8 GB DDR4 modules with black aluminium heatspreaders, giving 16 GB total in a matched dual-channel pair. No extra parts are required for installation.
This specific kit is 16 GB (2 × 8 GB) at DDR4 3600 with CL17 17-18-18-38 timing at 1.35 V. Other capacities or frequencies are separate part numbers; select the kit that matches your motherboard's qualified vendor list and your total memory target.
With Intel XMP 2.0 enabled on a compatible Z590, Z490, Z390, Z370 or Z270 platform, the modules run at 3600 MT/s with 17-18-18-38 timings at 1.35 V. Without XMP they fall back to standard JEDEC speeds.
อื่น ๆ ในหมวดนี้
หมวดเดียวกัน การชำระเงินแบบเดียวกัน — แปดสกุลเงินคริปโตและอัตราแลกเปลี่ยนที่ล็อกไว้ 30 นาที
สิ่งที่คุณใช้ชำระ และสิ่งที่คุณใช้อ่านราคา
ส่งจากกระเป๋าเงินของคุณเมื่อชำระเงิน
แสดงผลเท่านั้น — แคตตาล็อกสินค้าตั้งราคาเป็นดอลลาร์สหรัฐ
ไม่พบสกุลเงินที่ตรงกัน
เลือกภาษาที่ต้องการให้เว็บไซต์แสดงผล
ไม่พบภาษาที่ตรงกัน
ยังไม่เคยใช้งานใช่ไหม
มีบัญชีอยู่แล้วใช่ไหม
ไม่มีการรีเซ็ตแบบอัตโนมัติ ร้านนี้ไม่ส่งอีเมลใด ๆ จึงไม่มีลิงก์ใช้ครั้งเดียวให้ขอ ปล่อยที่อยู่อีเมลนี้ไว้ในบัญชี แล้วเจ้าหน้าที่จะดำเนินการให้ด้วยตนเอง
รับคำขอแล้ว
ไม่มีอะไรถูกส่งไปยังกล่องจดหมายของคุณ — ร้านนี้ไม่ส่งอีเมลใด ๆ เลย มีคนดำเนินการเรื่องนี้ให้ด้วยมือ
นึกออกแล้วใช่ไหม