Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four black DDR4 modules with aluminum heatspreaders

G.SKILL

G.SKILL Ripjaws V F4-3200C16Q-64GVK 64GB desktop RAM

SKU CH-NK7R-MBE86 MPN F4-3200C16Q-64GVK

64GB DDR4 kit with four 16GB modules at 3200MHz CL16 and 1.35V for Intel XMP 2.0 platforms

  • Capacity64GB (4 x 16GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 64GB (4 x 16GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency · Color · Fan Included CL16 · Black · No

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with CL16 16-18-18-38 timings
  • Intel XMP 2.0 profile enables rated performance
  • Low 1.35 V voltage reduces power draw
  • 42 mm heatspreader height clears large CPU coolers

Ripjaws V 64GB DDR4 kit

This G.SKILL Ripjaws V kit provides 64GB of desktop memory across four 16GB modules. It targets builders upgrading Intel X299, Z370, Z390, Z490, Z590 or Z690 DDR4 platforms, as well as AMD X570 and B550 systems. The unbuffered, non-ECC DIMMs install in standard 288-pin slots.

3200 MT/s CL16 at 1.35V

The decisive specification is the rated speed of DDR4 3200 (PC4 25600) with timings of 16-18-18-38 at 1.35V. Intel XMP 2.0 lets the firmware apply those parameters automatically on supported boards. Matching these figures to the motherboard QVL confirms whether the kit will run at its advertised rate.

Aluminium heatspreader for sustained loads

Each module uses a 42mm black aluminium heatspreader to move heat away from the DRAM during extended gaming, rendering or data-processing sessions. The low-profile height keeps clearance for most oversized CPU coolers. G.SKILL validates every kit on major motherboard brands to maintain stability under continuous throughput.

Kohokohdat

  • 64 GB total capacity from four 16 GB modules
  • DDR4 3200 speed with CL16 16-18-18-38 timings
  • Intel XMP 2.0 profile enables rated performance
  • Low 1.35 V voltage reduces power draw
  • 42 mm heatspreader height clears large CPU coolers

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3200C16Q-64GVK
Capacity64GB (4 x 16GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / B550
Intel X299 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370
Lähetyspaino0.22 kg
Pakkauksen mitat206 × 135 × 22 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What real-world speed will I see from the DDR4 3200 rating once the kit is installed?

The kit runs at 3200 MT/s with CL16 timing when the Intel XMP 2.0 profile is enabled in BIOS; otherwise it operates at the platform's default DDR4 speed.

What does the Intel XMP 2.0 label on this kit actually guarantee?

It provides a one-click BIOS profile that sets 3200 MT/s, 1.35 V and 16-18-18-38 timings on supported Intel platforms without manual tuning.

Will the 42 mm heatspreader height clear my large CPU cooler?

The 42 mm module height is designed for compatibility with most oversized air coolers, leaving room for typical heatsink clearance.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.