Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two red aluminium heatspreader DDR4 modules side by side

G.SKILL

G.SKILL Ripjaws V 16GB (2×8GB) DDR4 3600 CL19 F4-3600C19D-16GVRB desktop RAM

SKU CH-TT37-Y2FQX MPN F4-3600C19D-16GVRB

Dual-channel 16GB DDR4 kit at 3600 MT/s with CL19 timings, 1.35V operation, Intel XMP 2.0 support, and a 42mm red aluminium heatspreader

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3600 (PC4 28800)
  • CAS LatencyCL19
  • Timing19-20-20-40
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3600 (PC4 28800)

CAS Latency · Color · Fan Included CL19 · Red · No

  • Dual-channel 16 GB kit boosts multitasking throughput
  • 3600 MT/s DDR4 speed accelerates gaming and rendering
  • CL19 19-20-20-40 timings deliver responsive low-latency operation
  • 35 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader clears oversized CPU coolers

Kit capacity and platform fit

This dual-channel kit provides 16GB of DDR4 memory across two 8GB modules rated at 3600 MT/s with CL19 timings. It is validated for Intel Z590, Z490, Z390, Z370 and Z270 platforms and operates at 1.35V using Intel XMP 2.0 profiles. The red aluminium heatspreaders keep module height to 42mm for broad cooler clearance.

Thermals and power at rated speed

The low-profile aluminium heatspreaders dissipate heat from the DRAM without adding active noise, while the 1.35V operating voltage limits power draw during typical desktop workloads. Modules run at the advertised 19-20-20-40 timings out of the box when XMP 2.0 is enabled in the BIOS. Unbuffered, non-ECC operation suits standard consumer motherboards.

Sustained load behaviour

Under extended gaming, rendering or data-processing sessions the 42mm heatspreaders maintain stable temperatures without throttling the 3600 MT/s data rate. Matched factory testing across major motherboard brands ensures consistent dual-channel performance over long periods. The kit is sold as a matched pair; mixing with other kits is not recommended.

Kohokohdat

  • Dual-channel 16 GB kit boosts multitasking throughput
  • 3600 MT/s DDR4 speed accelerates gaming and rendering
  • CL19 19-20-20-40 timings deliver responsive low-latency operation
  • 35 V operation reduces power draw and heat
  • 42 mm low-profile heatspreader clears oversized CPU coolers

Tekniset tiedot

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3600C19D-16GVRB
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3600 (PC4 28800)
CAS LatencyCL19
Timing19-20-20-40
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorRed
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseIntel Z590 / Z490 / Z390 / Z370 / Z270
Lähetyspaino0.13 kg
Pakkauksen mitat204 × 133 × 18 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install these 288-pin DDR4 modules and which slot pair should I use for the dual-channel kit?

Insert both 8 GB sticks into the same-coloured DIMM slots — usually the second and fourth from the CPU socket — so the board runs them in dual-channel mode; press down firmly until the retention clips click.

What maintenance or replacement will this 1.35 V DDR4 kit need over time?

No scheduled maintenance is required; keep the 42 mm heatspreader fins dust-free with occasional compressed air, and replace the kit only if a module fails or you need more than 16 GB total capacity.

What limit appears first when this CL19 3600 MT/s kit runs sustained workloads?

The CAS latency of 19 cycles and 1.35 V operating voltage set the practical ceiling; prolonged heavy loads will hit timing and voltage limits before thermal throttling becomes an issue.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.