IBM
IBM 49Y1880 1TB 3.5" SAS 7.2K 6Gb/s internal hard drive
A 3.5-inch SAS hard drive with 1 TB capacity, 7200 RPM spindle speed and a hot-swap tray included
- PackagingBare Drive
- InterfaceSAS 6Gb/s
- Capacity1TB
- NAND Flash Memory TypeSLC
- RPM7200 RPM
- Average Latency6Gb/s
- 1 TB capacity for high-volume storage
- 7 200 RPM spindle speed for responsive data access
- SAS 6 Gb/s interface for reliable enterprise connectivity
- 5 inch form factor fits standard drive bays
- Hot-swap tray included for quick drive replacement
IBM 49Y1880 1TB SAS Near-Line Drive
The IBM 49Y1880 is a 1TB 3.5-inch internal hard drive built for near-line storage workloads. It spins at 7200 RPM and connects through a SAS 6Gb/s interface. The drive ships in bare packaging with a hot-swap tray included for quick installation in compatible bays.
Suited for servers needing hot-swap SAS storage
This drive fits servers and storage arrays that accept 3.5-inch SAS drives and require hot-swap capability. It is not for systems limited to smaller form factors or those without SAS host controllers. Buyers needing higher capacities or different interface protocols should consider other options.
SAS 6Gb/s interface determines compatibility
The single specification that decides fit is the SAS 6Gb/s interface. Your backplane or controller must support this exact interface for the drive to function. Without a compatible SAS connection the drive cannot be used regardless of capacity or spindle speed.
Fordele
- 1 TB capacity for high-volume storage
- 7 200 RPM spindle speed for responsive data access
- SAS 6 Gb/s interface for reliable enterprise connectivity
- 5 inch form factor fits standard drive bays
- Hot-swap tray included for quick drive replacement
Specifikationer
| Brand | IBM |
|---|---|
| Model | 49Y1880 |
| Packaging | Bare Drive |
| Interface | SAS 6Gb/s |
| Capacity | 1TB |
| NAND Flash Memory Type | SLC |
| RPM | 7200 RPM |
| Average Latency | 6Gb/s |
| Form Factor | 3.5" |
Spørgsmål om denne vare
Will the 3.5-inch form factor fit my standard 3.5-inch drive bay?
Yes, the 3.5-inch form factor matches a standard 3.5-inch internal bay and the included hot-swap tray secures it in compatible hot-swap cages.
How do I install the drive using the supplied hot-swap tray, and what step is often missed?
Mount the drive into the tray with the four side screws, slide the assembly into the hot-swap bay until the SAS connector seats fully, then lock the lever; the step often missed is engaging the lever completely so the drive registers.
When should I plan to replace this 7200 RPM SAS drive in a near-line workload?
Replace it when SMART attributes show reallocated sectors, seek errors rise, or after the vendor-rated service life for near-line SAS drives is reached.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
