Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
3.5 inch SAS hard drive with hot-swap tray

IBM

IBM 49Y1880 1TB 3.5" SAS 7.2K 6Gb/s internal hard drive

SKU CH-Q2ZH-HM41X

A 3.5-inch SAS hard drive with 1 TB capacity, 7200 RPM spindle speed and a hot-swap tray included

  • PackagingBare Drive
  • InterfaceSAS 6Gb/s
  • Capacity1TB
  • NAND Flash Memory TypeSLC
  • RPM7200 RPM
  • Average Latency6Gb/s
  • 1 TB capacity for high-volume storage
  • 7 200 RPM spindle speed for responsive data access
  • SAS 6 Gb/s interface for reliable enterprise connectivity
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray included for quick drive replacement

IBM 49Y1880 1TB SAS Near-Line Drive

The IBM 49Y1880 is a 1TB 3.5-inch internal hard drive built for near-line storage workloads. It spins at 7200 RPM and connects through a SAS 6Gb/s interface. The drive ships in bare packaging with a hot-swap tray included for quick installation in compatible bays.

Suited for servers needing hot-swap SAS storage

This drive fits servers and storage arrays that accept 3.5-inch SAS drives and require hot-swap capability. It is not for systems limited to smaller form factors or those without SAS host controllers. Buyers needing higher capacities or different interface protocols should consider other options.

SAS 6Gb/s interface determines compatibility

The single specification that decides fit is the SAS 6Gb/s interface. Your backplane or controller must support this exact interface for the drive to function. Without a compatible SAS connection the drive cannot be used regardless of capacity or spindle speed.

Kohokohdat

  • 1 TB capacity for high-volume storage
  • 7 200 RPM spindle speed for responsive data access
  • SAS 6 Gb/s interface for reliable enterprise connectivity
  • 5 inch form factor fits standard drive bays
  • Hot-swap tray included for quick drive replacement

Tekniset tiedot

BrandIBM
Model49Y1880
PackagingBare Drive
InterfaceSAS 6Gb/s
Capacity1TB
NAND Flash Memory TypeSLC
RPM7200 RPM
Average Latency6Gb/s
Form Factor3.5"

Kysymyksiä tästä tuotteesta

Will the 3.5-inch form factor fit my standard 3.5-inch drive bay?

Yes, the 3.5-inch form factor matches a standard 3.5-inch internal bay and the included hot-swap tray secures it in compatible hot-swap cages.

How do I install the drive using the supplied hot-swap tray, and what step is often missed?

Mount the drive into the tray with the four side screws, slide the assembly into the hot-swap bay until the SAS connector seats fully, then lock the lever; the step often missed is engaging the lever completely so the drive registers.

When should I plan to replace this 7200 RPM SAS drive in a near-line workload?

Replace it when SMART attributes show reallocated sectors, seek errors rise, or after the vendor-rated service life for near-line SAS drives is reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.