iDsonix
iDsonix USB3.0-A-1m SATA to USB 3.0 converter cable 1m
Connects a 2.5 inch SATA drive to a USB 3.0 port at up to 5 Gbps with LED status lights
- ColorBlack
- StandardsUSB 3.0
- Transfer RateUp to 5 Gbps
- Weight0.08kg
- Featureshigh speed transmission Small and portable No driver require
- Package Contents1 x Type A and USB to SATA Cable
- USB 3.0 delivers up to 5 Gbps transfer speeds for quick backups
- Connects any 2.5 inch SATA HDD or SSD without extra drivers
- Red and blue LEDs show power and data activity at a glance
- Weighs only .08 kg so it slips into a laptop bag easily
- One metre cable gives flexible placement on desk or in a rack
USB 3.0 to SATA adapter for 2.5 inch drives
This iDsonix cable connects a standard 2.5 inch SATA hard drive or solid-state drive to a USB 3.0 port on a computer. It is suited for users who need quick external access to a bare drive for backup or data migration. No driver installation is required; the adapter works immediately on connection. The one metre length gives flexible placement on a desk.
USB 3.0 interface practical limits
The adapter uses a USB 3.0 connection with a maximum transfer rate of 5 Gbps and is backward compatible with USB 2.0, 1.1 and 1.0 ports. Actual throughput will be lower than the theoretical peak and varies with the host controller and drive performance. The cable draws power from the USB port, so the connected drive must operate within the port's available current. It does not support 3.5 inch drives or drives requiring external power.
2.5 inch SATA drive capacity and headroom
The converter handles any 2.5 inch SATA III, II or I hard drive or SSD within the USB port's power budget. It comfortably serves typical laptop drives used for file backup or system cloning. Drives with higher power draw may not spin up reliably or may cause the USB port to disconnect. The adapter is not designed for 3.5 inch desktop drives or for RAID enclosures that need supplemental power.
Fordele
- USB 3.0 delivers up to 5 Gbps transfer speeds for quick backups
- Connects any 2.5 inch SATA HDD or SSD without extra drivers
- Red and blue LEDs show power and data activity at a glance
- Weighs only .08 kg so it slips into a laptop bag easily
- One metre cable gives flexible placement on desk or in a rack
Specifikationer
| Brand | iDsonix |
|---|---|
| Model | USB3.0-A-1m |
| Color | Black |
| Standards | USB 3.0 |
| Transfer Rate | Up to 5 Gbps |
| Weight | 0.08kg |
| Features | high speed transmission Small and portable No driver required, plug and play |
| Package Contents | 1 x Type A and USB to SATA Cable |
Spørgsmål om denne vare
Which iDsonix cable should I choose if I have a 2.5 inch SATA drive?
This model is built for 2.5 inch SATA HDDs and SSDs and includes a USB Type-A connector on a one metre cable.
What does the 5 Gbps rating mean when I copy files?
The link runs at USB 3.0 SuperSpeed, giving a theoretical maximum of 5 Gbps; actual throughput will be lower and varies with the drive and host controller.
Does the USB 3.0 interface limit the speed of a SATA III drive?
USB 3.0 caps the connection at 5 Gbps, so a SATA III drive cannot exceed that bandwidth even though its native interface is faster.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.
Black Box Corporation DisplayPort to DVI Fibre Optic Cable 15 ft 4.5 m 1.35 GB/s
- Consumer Electronics



