Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

Kingston Technology Corp.

Kingston Technology Corp. KVR400/1GR 1GB DDR 400 (PC 3200) desktop RAM

SKU CH-5AN9-JBF4P MPN KVR400/1GR

1GB DDR 400 desktop memory with CL3 latency and 2.60V operation for PC 3200 systems

  • Capacity1GB
  • SpeedDDR 400 (PC 3200)
  • CAS LatencyCL3
  • Voltage2.60V
  • Heat SpreaderNo
  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

Kingston ValueRAM 1GB DDR 400

This Kingston ValueRAM module provides 1GB of DDR 400 (PC 3200) desktop memory. It operates at CL3 latency with a 2.60V voltage and has no heat spreader. The module is 100% tested and complies with JEDEC specifications.

Suitable for legacy DDR systems

This memory suits builders repairing or upgrading older desktops that require DDR 400 modules. Systems needing higher capacity, lower voltage, or modern DDR generations cannot use this part.

DDR 400 (PC 3200) speed rating

The DDR 400 (PC 3200) speed rating is the single specification that determines compatibility. Your motherboard must support this exact speed and voltage for the module to function correctly.

Fordele

  • 1GB capacity for basic desktop tasks
  • DDR 400 speed rated at PC 3200
  • CAS latency CL3 for standard timing
  • 60V operation within JEDEC spec
  • 100% tested through Advanced Validation Labs

Specifikationer

BrandKingston
SeriesValueRAM
ModelKVR400/1GR
Capacity1GB
SpeedDDR 400 (PC 3200)
CAS LatencyCL3
Voltage2.60V
Heat SpreaderNo
Forsendelsesvægt0.09 kg
Pakkestørrelse196 × 145 × 23 mm

Spørgsmål om denne vare

Will this 184-pin DIMM fit my DDR 400 desktop motherboard?

The module is a standard 184-pin DDR DIMM keyed for DDR 400 (PC 3200) slots. It requires a motherboard that accepts 2.60 V DDR memory and supports CL3 timing.

What is the correct way to seat this KVR400/1GR module, and which step do builders often miss?

Align the notch with the slot key, press straight down until both side clips snap shut, then verify the module sits flush. The missed step is checking that both clips are fully locked.

Does this ValueRAM stick need any firmware updates or thermal paste replacement over its life?

No firmware or thermal paste is involved. The module has no heat spreader and runs at the JEDEC 2.60 V spec. If errors appear later, reseat the DIMM or test with a memory diagnostic tool.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.