Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Clear flexible PVC tube with 11mm outer diameter

ModMyMods

ModMyMods 8mm ID x 11mm OD PVC Tubing Clear 58000

SKU CH-8SY3-987N7

Clear PVC tubing with 8 mm inner and 11 mm outer diameter, sold by the foot for compact liquid-cooling loops

  • TypeTubing
  • Precise 8 mm inner diameter for tight routing
  • 11 mm outer diameter fits standard compression fittings
  • Clear PVC shows coolant colour and flow
  • Sold by the foot so you buy exact length
  • Designed for compact builds such as Raspberry Pi kits

Clear PVC tubing for compact liquid cooling

ModMyMods 8mm ID x 11mm OD PVC tubing is sold by the foot and suited to small-scale liquid-cooling projects. The clear construction lets you inspect flow and check for bubbles without disassembly. It matches the dimensions required by the ModMyMods Raspberry Pi Mini Water Cooling Kit and similar low-profile loops.

Simple push-on fitting with basic tools

Installation only requires cutting the tube to length and sliding it over barbed or compression fittings sized for 8 mm inner diameter. A sharp blade gives a clean end that seals reliably when the clamp or collar is tightened. The most common issue is kinking if the bend radius is too tight; warm the tube slightly or use an insert to keep the path smooth.

Stable flow during extended operation

The PVC material maintains its shape under continuous pump pressure and typical coolant temperatures found in compact loops. It resists clouding so visual flow checks remain easy after weeks of use. The tubing is not intended for high-pressure or high-temperature industrial circuits beyond the scope of small PC cooling builds.

Fordele

  • Precise 8 mm inner diameter for tight routing
  • 11 mm outer diameter fits standard compression fittings
  • Clear PVC shows coolant colour and flow
  • Sold by the foot so you buy exact length
  • Designed for compact builds such as Raspberry Pi kits

Specifikationer

TypeTubing

Spørgsmål om denne vare

How do I confirm the tubing is flowing correctly after I install it in my loop?

Run the pump and watch for a steady stream of clear liquid through the transparent PVC with no bubbles or kinks restricting flow.

What comes in the package and what fittings must I purchase separately?

The box contains only the clear PVC tubing sold by the foot; you will need 8 mm ID compression fittings or barbs to connect it to your blocks and radiator.

Should I choose the 8 mm ID × 11 mm OD size or a different diameter for my build?

Select this 8 mm ID × 11 mm OD tubing when your water‑cooling components use 8 mm inner‑diameter ports; it matches the ModMyMods Raspberry Pi Mini Water Cooling Kit and similar small‑form‑factor loops.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.