Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Clear flexible PVC tube with 11mm outer diameter

ModMyMods

ModMyMods 8mm ID x 11mm OD PVC Tubing Clear 58000

SKU CH-8SY3-987N7

Clear PVC tubing with 8 mm inner and 11 mm outer diameter, sold by the foot for compact liquid-cooling loops

  • TypeTubing
  • Precise 8 mm inner diameter for tight routing
  • 11 mm outer diameter fits standard compression fittings
  • Clear PVC shows coolant colour and flow
  • Sold by the foot so you buy exact length
  • Designed for compact builds such as Raspberry Pi kits

Clear PVC tubing for compact liquid cooling

ModMyMods 8mm ID x 11mm OD PVC tubing is sold by the foot and suited to small-scale liquid-cooling projects. The clear construction lets you inspect flow and check for bubbles without disassembly. It matches the dimensions required by the ModMyMods Raspberry Pi Mini Water Cooling Kit and similar low-profile loops.

Simple push-on fitting with basic tools

Installation only requires cutting the tube to length and sliding it over barbed or compression fittings sized for 8 mm inner diameter. A sharp blade gives a clean end that seals reliably when the clamp or collar is tightened. The most common issue is kinking if the bend radius is too tight; warm the tube slightly or use an insert to keep the path smooth.

Stable flow during extended operation

The PVC material maintains its shape under continuous pump pressure and typical coolant temperatures found in compact loops. It resists clouding so visual flow checks remain easy after weeks of use. The tubing is not intended for high-pressure or high-temperature industrial circuits beyond the scope of small PC cooling builds.

Kohokohdat

  • Precise 8 mm inner diameter for tight routing
  • 11 mm outer diameter fits standard compression fittings
  • Clear PVC shows coolant colour and flow
  • Sold by the foot so you buy exact length
  • Designed for compact builds such as Raspberry Pi kits

Tekniset tiedot

TypeTubing

Kysymyksiä tästä tuotteesta

How do I confirm the tubing is flowing correctly after I install it in my loop?

Run the pump and watch for a steady stream of clear liquid through the transparent PVC with no bubbles or kinks restricting flow.

What comes in the package and what fittings must I purchase separately?

The box contains only the clear PVC tubing sold by the foot; you will need 8 mm ID compression fittings or barbs to connect it to your blocks and radiator.

Should I choose the 8 mm ID × 11 mm OD size or a different diameter for my build?

Select this 8 mm ID × 11 mm OD tubing when your water‑cooling components use 8 mm inner‑diameter ports; it matches the ModMyMods Raspberry Pi Mini Water Cooling Kit and similar small‑form‑factor loops.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.