Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Compact enclosed 24V 2.1A switching power supply with metal casing and terminal block connections

myVolts

myVolts S-50-24 2.1A DC power supply for factory switching

SKU CH-DBKA-5YYSK MPN S-50-24

A 24 V DC switching supply delivering 2.1 A and 50.4 W with 86 % efficiency, selectable 85-132 VAC or 170-264 VAC input and ±10 % voltage adjustment

  • TypeAT
  • Delivers stable 24 V DC at 2.1 A for industrial equipment
  • 4 W output with 86 % efficiency reduces energy waste
  • Selectable 85-132 VAC or 170-264 VAC input suits global mains
  • Copper coil transformer and magnetic-ring filter capacitor ensure reliable operation
  • Simple wiring and ±10 % voltage adjustment speed up installation

Industrial 24 V 2.1 A switching supply

The myVolts S-50-24 delivers 24 V DC at up to 2.1 A for a rated 50.4 W output. It is built for factory automation, PLC control systems, transportation equipment and similar industrial installations that need a compact, DIN-rail style DC source.

Check input selector and load before wiring

Verify the AC selector switch matches your mains: choose the 85–132 VAC position for 115 V nominal or the 170–264 VAC position for 230 V nominal, both at 47–63 Hz. Confirm the connected load stays within the 0–2.1 A range and that the ±10 % voltage adjustment covers any set-point requirement.

Efficiency, ripple and inrush in normal operation

Typical efficiency reaches 86 % with line regulation of ±0.5 % and load regulation of ±0.5 %. Output ripple and noise is specified at 200 mVp-p. Cold-start inrush peaks at 45 A on a 230 VAC line, while leakage current remains below 2 mA at 240 VAC.

Fordele

  • Delivers stable 24 V DC at 2.1 A for industrial equipment
  • 4 W output with 86 % efficiency reduces energy waste
  • Selectable 85-132 VAC or 170-264 VAC input suits global mains
  • Copper coil transformer and magnetic-ring filter capacitor ensure reliable operation
  • Simple wiring and ±10 % voltage adjustment speed up installation

Specifikationer

TypeAT

Spørgsmål om denne vare

What comes with the S-50-24 and what must I source separately?

The unit is a 24V 2.1A switching supply rated at 50.4W with 86% efficiency. It includes an input-voltage selector switch for 85-132VAC or 170-264VAC. You must provide the AC mains cable, output wiring, and any enclosure or DIN-rail hardware.

How do I decide between the two input-voltage ranges on the selector switch?

Set the switch to 85-132VAC for 115VAC mains (input current 1.1A) or to 170-264VAC for 230VAC mains (input current 0.65A). Match the setting to your local supply to avoid damage.

What does the 200mVp-p ripple figure mean for my PLC or industrial control gear?

The output ripple and noise is specified at 200mV peak-to-peak. With load and line regulation each at ±0.5%, the 24V rail stays within ±1% overall, which is typical for PLCs and automation equipment.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.