Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Two green DDR4 ECC UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 ECC UDIMM kit for ASRock X570 Taichi

SKU CH-FD59-F0FPG

16 GB DDR4-3200 ECC UDIMM kit, CL22 at 1.2 V, validated for ASRock X570 Taichi

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit with two 8 GB modules for easy capacity scaling
  • DDR4 3200 speed rated at PC4-25600 for responsive data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • CL22 latency at 1.20 V balances timing and power efficiency
  • Validated for ASRock X570 Taichi motherboard to ensure reliable compatibility

ECC UDIMM kit for ASRock X570 Taichi

This NEMIX RAM kit provides 16 GB of DDR4 ECC memory in two 8 GB modules. It runs at 3200 MHz with CL22 latency and 1.20 V. The unbuffered design fits desktop DIMM slots on the ASRock X570 Taichi motherboard.

Two 288-pin modules fill two slots

Each 1Rx8 module occupies a single DDR4 slot on the board. The kit leaves remaining slots free for future expansion. No heat spreader is fitted, so clearance under large air coolers is maximised.

Suited for builders adding ECC to X570 Taichi

Buyers who need registered or load-reduced modules should look elsewhere. Systems requiring speeds above 3200 MHz or lower CAS latency than CL22 are not addressed by this kit.

Fordele

  • 16 GB kit with two 8 GB modules for easy capacity scaling
  • DDR4 3200 speed rated at PC4-25600 for responsive data throughput
  • ECC unbuffered design detects and corrects single-bit errors automatically
  • CL22 latency at 1.20 V balances timing and power efficiency
  • Validated for ASRock X570 Taichi motherboard to ensure reliable compatibility

Specifikationer

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Spørgsmål om denne vare

Does the CL22 latency limit sustained throughput on the DDR4 3200 kit?

CL22 is the rated CAS latency at 3200 MT/s; the modules run at 1.2 V and are stress-tested under load for stability during extended use.

How much heat does the 1.2 V ECC UDIMM kit produce during all-day operation?

Operating at 1.2 V with no heat spreader, the 1Rx8 modules generate minimal heat and run silently in a standard chassis airflow.

What motherboard slot and chipset are required for this 288-pin kit to function?

The kit needs an ASRock X570 Taichi motherboard with DDR4 288-pin UDIMM slots and ECC support enabled in the BIOS.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.