BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 US$
0.00278214BTC
I lager
NEMIX RAM
NEMIX RAM 16GB (2x8GB) DDR4 3200 CL22 ECC UDIMM kit for ASRock X570 Taichi
16 GB DDR4-3200 ECC UDIMM kit, CL22 at 1.2 V, validated for ASRock X570 Taichi
- Capacity16GB (2 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCYes
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 16 GB kit with two 8 GB modules for easy capacity scaling
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- ECC unbuffered design detects and corrects single-bit errors automatically
- CL22 latency at 1.20 V balances timing and power efficiency
- Validated for ASRock X570 Taichi motherboard to ensure reliable compatibility
ECC UDIMM kit for ASRock X570 Taichi
This NEMIX RAM kit provides 16 GB of DDR4 ECC memory in two 8 GB modules. It runs at 3200 MHz with CL22 latency and 1.20 V. The unbuffered design fits desktop DIMM slots on the ASRock X570 Taichi motherboard.
Two 288-pin modules fill two slots
Each 1Rx8 module occupies a single DDR4 slot on the board. The kit leaves remaining slots free for future expansion. No heat spreader is fitted, so clearance under large air coolers is maximised.
Suited for builders adding ECC to X570 Taichi
Buyers who need registered or load-reduced modules should look elsewhere. Systems requiring speeds above 3200 MHz or lower CAS latency than CL22 are not addressed by this kit.
I korthet
- 16 GB kit with two 8 GB modules for easy capacity scaling
- DDR4 3200 speed rated at PC4-25600 for responsive data throughput
- ECC unbuffered design detects and corrects single-bit errors automatically
- CL22 latency at 1.20 V balances timing and power efficiency
- Validated for ASRock X570 Taichi motherboard to ensure reliable compatibility
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | ASRock Server Motherboard Compatible Series Memory |
| Model | ASRock DDR4 3200MHZ ECC Unbuffered UDIMM |
| Part Number | ME25600-818K2 |
| Capacity | 16GB (2 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASRock |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 ECC UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 16GB (2X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT |
Frågor om den här produkten
Does the CL22 latency limit sustained throughput on the DDR4 3200 kit?
CL22 is the rated CAS latency at 3200 MT/s; the modules run at 1.2 V and are stress-tested under load for stability during extended use.
How much heat does the 1.2 V ECC UDIMM kit produce during all-day operation?
Operating at 1.2 V with no heat spreader, the 1Rx8 modules generate minimal heat and run silently in a standard chassis airflow.
What motherboard slot and chipset are required for this 288-pin kit to function?
The kit needs an ASRock X570 Taichi motherboard with DDR4 288-pin UDIMM slots and ECC support enabled in the BIOS.
Även i den här avdelningen
Andra har jämfört dessa
Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.
