NEMIX RAM
NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 1Rx4 1.2V 288-pin ECC RDIMM HPE P00920 memory upgrade
16GB DDR4 2933MHz ECC Registered RDIMM for HPE servers, CL21 1.2V single-rank
- Capacity16GB
- SpeedDDR4 2933 (PC4 23400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- ECC protection safeguards data integrity in critical workloads
- Registered design improves signal stability for dense server configurations
- 16 GB capacity expands memory headroom for virtualised environments
- 2933 MT/s DDR4 speed matches HPE P00920 specifications
- 2 V operation reduces power draw per module
HPE-Compatible DDR4 ECC RDIMM
This 16GB registered DIMM is built for HPE servers and workstations that require DDR4 2933 memory with error correction. The module carries the PC4-23400 rating and a CL21 latency profile suited to enterprise workloads. It targets administrators upgrading compatible HPE platforms such as the P00920 family.
288-pin registered form factor
The stick uses a standard 288-pin DDR4 RDIMM edge connector and a single-rank 1Rx4 organisation based on major OEM DRAM. No heat spreader is fitted, so clearance inside dense chassis is maximised. Installation follows the usual DIMM-slot procedure; consult the system manual for population rules.
1.20V operation with ECC integrity
Running at 1.20V, the module draws minimal power while ECC circuitry corrects single-bit errors in real time. Registered buffering reduces electrical load on the memory controller, aiding signal integrity in multi-DIMM configurations. Typical server airflow keeps temperatures in check without active cooling on the module itself.
Fordele
- ECC protection safeguards data integrity in critical workloads
- Registered design improves signal stability for dense server configurations
- 16 GB capacity expands memory headroom for virtualised environments
- 2933 MT/s DDR4 speed matches HPE P00920 specifications
- 2 V operation reduces power draw per module
Specifikationer
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR4 2933MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR23400-614K1 |
| Capacity | 16GB |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | HPE |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 1Rx4 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory |
Spørgsmål om denne vare
Does the DDR4 2933 PC4-23400 interface cap speed at 2933 MT/s in HPE servers?
Yes, the DDR4 2933 PC4-23400 standard runs at 2933 MT/s; the module will operate at that speed or downclock to the platform's supported rate.
What physical slot and clearance does the 288-pin 1Rx4 RDIMM need to fit?
It requires a standard 288-pin DDR4 RDIMM slot; the module has no heat spreader, so it fits low-profile DIMM bays in HPE servers.
How is the ECC registered module installed, and what step is often missed?
Power down, open the chassis, align the key notch with the slot ridge, press firmly until both latches click, then enable ECC in the BIOS/UEFI — skipping the BIOS step leaves error correction inactive.
Også på denne hylde
Kunderne har også sammenlignet disse
Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.



