Vi tar emot kryptovaluta — så att kryptot du äger kan köpa riktig hårdvara.Betala med krypto, använd det till riktig hårdvara. Fri, försäkrad frakt över hela världen vid köp över 399 $. Neutrala, omärkta ytterkartonger, skickade från Tyskland.Fri, försäkrad frakt över 399 $. Din kurs låses i 30 minuter så snart kassan öppnas.Kursen låst i 30 minuter. Varje artikel är förseglad, har kontrollerat serienummer och täcks av 24 månaders garanti.Förseglad, 24 månaders garanti.

Bevakade produkter Logga in

NEMIX RAM

NEMIX RAM 16GB DDR4 2933 PC4-23400 CL21 1Rx4 1.2V 288-pin ECC RDIMM HPE P00920 memory upgrade

SKU CH-H5R4-D2C55

16GB DDR4 2933MHz ECC Registered RDIMM for HPE servers, CL21 1.2V single-rank

  • Capacity16GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection safeguards data integrity in critical workloads
  • Registered design improves signal stability for dense server configurations
  • 16 GB capacity expands memory headroom for virtualised environments
  • 2933 MT/s DDR4 speed matches HPE P00920 specifications
  • 2 V operation reduces power draw per module

HPE-Compatible DDR4 ECC RDIMM

This 16GB registered DIMM is built for HPE servers and workstations that require DDR4 2933 memory with error correction. The module carries the PC4-23400 rating and a CL21 latency profile suited to enterprise workloads. It targets administrators upgrading compatible HPE platforms such as the P00920 family.

288-pin registered form factor

The stick uses a standard 288-pin DDR4 RDIMM edge connector and a single-rank 1Rx4 organisation based on major OEM DRAM. No heat spreader is fitted, so clearance inside dense chassis is maximised. Installation follows the usual DIMM-slot procedure; consult the system manual for population rules.

1.20V operation with ECC integrity

Running at 1.20V, the module draws minimal power while ECC circuitry corrects single-bit errors in real time. Registered buffering reduces electrical load on the memory controller, aiding signal integrity in multi-DIMM configurations. Typical server airflow keeps temperatures in check without active cooling on the module itself.

I korthet

  • ECC protection safeguards data integrity in critical workloads
  • Registered design improves signal stability for dense server configurations
  • 16 GB capacity expands memory headroom for virtualised environments
  • 2933 MT/s DDR4 speed matches HPE P00920 specifications
  • 2 V operation reduces power draw per module

Specifikationer

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR4 2933MHZ ECC RDIMM Registered Server Memory
Part NumberMR23400-614K1
Capacity16GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemHPE
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR4 2933MHZ PC4-23400 1Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Frågor om den här produkten

Does the DDR4 2933 PC4-23400 interface cap speed at 2933 MT/s in HPE servers?

Yes, the DDR4 2933 PC4-23400 standard runs at 2933 MT/s; the module will operate at that speed or downclock to the platform's supported rate.

What physical slot and clearance does the 288-pin 1Rx4 RDIMM need to fit?

It requires a standard 288-pin DDR4 RDIMM slot; the module has no heat spreader, so it fits low-profile DIMM bays in HPE servers.

How is the ECC registered module installed, and what step is often missed?

Power down, open the chassis, align the key notch with the slot ridge, press firmly until both latches click, then enable ECC in the BIOS/UEFI — skipping the BIOS step leaves error correction inactive.

Även i den här avdelningen

Andra har jämfört dessa

Samma hylla, samma kassa — åtta mynt och ett 30-minuters kurslås.