Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200MHz PC4-25600 CL22 288-Pin ECC RDIMM memory upgrade

SKU CH-HPV8-675RM

16 GB DDR4 ECC RDIMM running at 3200 MHz with CL22 latency, registered for stable full-population operation on Supermicro X12QCH+ motherboards

  • Capacity16GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes

Size 16GB

Vis 8 flere konfigurationer
  • 16GB capacity expands server memory for larger workloads
  • DDR4 3200MHz speed matches board-rated performance exactly
  • ECC and registered design corrects errors and stabilises full population
  • 2V operation meets standard server voltage requirement
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

NEMIX RAM 16GB DDR4 3200MHz ECC RDIMM

This 16GB DDR4 3200MHz PC4-25600 registered ECC RDIMM operates at 1.2V with CL22 latency. The 288-pin module uses a 1Rx8 configuration built with major OEM chips. It is designed as an exact-match upgrade for the Supermicro X12QCH+ motherboard.

Suited for servers needing registered ECC memory

This module fits systems that require registered (buffered) DDR4 RDIMMs with ECC error correction. Builders using motherboards that accept only unbuffered UDIMMs or SODIMM form factors cannot use this part. Systems that do not support ECC functionality should look elsewhere.

Registered ECC RDIMM form factor

The 288-pin registered DIMM architecture offloads the memory controller to allow full-capacity operation across populated slots. ECC capability detects and corrects single-bit errors to prevent data corruption. This specific form factor and registration type determines whether the module will be recognised and function correctly.

Fordele

  • 16GB capacity expands server memory for larger workloads
  • DDR4 3200MHz speed matches board-rated performance exactly
  • ECC and registered design corrects errors and stabilises full population
  • 2V operation meets standard server voltage requirement
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-618K1
Capacity16GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I pick the 16 GB stick or add a second identical module for 32 GB total?

Each module is 16 GB; adding a second gives 32 GB provided the Supermicro X12QCH+ manual allows two 1Rx8 RDIMMs per channel.

What does the 3200 MHz rating mean once the DIMM is installed in the server?

The board's memory controller will run the stick at 3200 MT/s with CL22 timings at 1.20 V, delivering the rated PC4-25600 bandwidth.

How does the 288-pin RDIMM interface affect maximum capacity on the X12QCH+?

Registered buffering lets the motherboard address every slot at full speed, so total capacity is limited only by the board's supported ranks per channel.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.