Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 16GB DDR4 3200MHz PC4-25600 CL22 288-Pin ECC RDIMM memory upgrade

SKU CH-HPV8-675RM

16 GB DDR4 ECC RDIMM running at 3200 MHz with CL22 latency, registered for stable full-population operation on Supermicro X12QCH+ motherboards

  • Capacity16GB
  • Type288-Pin DDR4 RDIMM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL22
  • Voltage1.20V
  • ECCYes
  • 16GB capacity expands server memory for larger workloads
  • DDR4 3200MHz speed matches board-rated performance exactly
  • ECC and registered design corrects errors and stabilises full population
  • 2V operation meets standard server voltage requirement
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

NEMIX RAM 16GB DDR4 3200MHz ECC RDIMM

This 16GB DDR4 3200MHz PC4-25600 registered ECC RDIMM operates at 1.2V with CL22 latency. The 288-pin module uses a 1Rx8 configuration built with major OEM chips. It is designed as an exact-match upgrade for the Supermicro X12QCH+ motherboard.

Suited for servers needing registered ECC memory

This module fits systems that require registered (buffered) DDR4 RDIMMs with ECC error correction. Builders using motherboards that accept only unbuffered UDIMMs or SODIMM form factors cannot use this part. Systems that do not support ECC functionality should look elsewhere.

Registered ECC RDIMM form factor

The 288-pin registered DIMM architecture offloads the memory controller to allow full-capacity operation across populated slots. ECC capability detects and corrects single-bit errors to prevent data corruption. This specific form factor and registration type determines whether the module will be recognised and function correctly.

Kohokohdat

  • 16GB capacity expands server memory for larger workloads
  • DDR4 3200MHz speed matches board-rated performance exactly
  • ECC and registered design corrects errors and stabilises full population
  • 2V operation meets standard server voltage requirement
  • 288-pin RDIMM form factor fits Supermicro X12QCH+ motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR4 ECC RDIMM Registered Server Memory
Part NumberMR25600-618K1
Capacity16GB
Type288-Pin DDR4 RDIMM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL22
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR4 ECC RDIMM Motherboard Compatible
Package Content16GB DDR4 3200MHz PC4-25600 1Rx8 1.2V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I pick the 16 GB stick or add a second identical module for 32 GB total?

Each module is 16 GB; adding a second gives 32 GB provided the Supermicro X12QCH+ manual allows two 1Rx8 RDIMMs per channel.

What does the 3200 MHz rating mean once the DIMM is installed in the server?

The board's memory controller will run the stick at 3200 MT/s with CL22 timings at 1.20 V, delivering the rated PC4-25600 bandwidth.

How does the 288-pin RDIMM interface affect maximum capacity on the X12QCH+?

Registered buffering lets the motherboard address every slot at full speed, so total capacity is limited only by the board's supported ranks per channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.