Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green bare circuit board DDR5 RDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 ECC RDIMM 1Rx8 1.1V memory upgrade

SKU CH-DXDV-2R6WY

16 GB DDR5 4800 ECC registered RDIMM for Supermicro servers, CL40 1.1 V 1Rx8 288-pin module

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for server tasks
  • Registered design supports dense memory configurations
  • 1 V operation reduces power draw under load
  • Validated for Supermicro X13SEM and SYS-211E systems

NEMIX RAM 16GB DDR5 4800 ECC RDIMM

This NEMIX RAM module provides 16GB of DDR5 ECC registered memory rated at 4800MHz with CL40 latency. It is built for Supermicro server and workstation platforms such as the SYS-211E-FRN2T and X13SEM-F. The 1Rx8 organisation and 1.1V operation suit high-density registered DIMM slots in mission-critical environments.

Check Supermicro DDR5 RDIMM compatibility

Verify that your Supermicro system accepts DDR5 288-pin RDIMMs and supports the 4800MHz PC5-38400 speed grade. Consult the motherboard manual for approved population order and maximum registered DIMM count per channel. Ensure the BIOS is current enough to initialise DDR5 ECC registered modules correctly before installation.

Passive design runs at 1.1V with no heat spreader

The module operates at 1.10V without an integrated heat spreader, relying on chassis airflow for cooling. Registered buffering adds negligible latency while maintaining signal integrity under sustained loads. Power draw remains low for a 16GB DDR5 RDIMM, keeping thermals and acoustic impact minimal in densely populated server configurations.

Fordele

  • ECC protection prevents data errors in critical workloads
  • DDR5 4800 speed delivers high bandwidth for server tasks
  • Registered design supports dense memory configurations
  • 1 V operation reduces power draw under load
  • Validated for Supermicro X13SEM and SYS-211E systems

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Spørgsmål om denne vare

Does the 16GB DDR5 4800 CL40 ECC RDIMM arrive as a single stick or do I need to order extra modules?

The package contains one 16GB 288-pin DDR5 RDIMM rated at 4800 MT/s with CL40 latency and 1.1 V operation; no additional modules are included.

Should I choose the 1Rx8 16GB version or look for a different rank configuration?

This module is a single-rank 1Rx8 design, which typically allows higher memory density per channel on Supermicro platforms that support DDR5 4800 registered ECC memory.

What does the 4800 MT/s rating mean once the RDIMM is installed in a Supermicro server?

The module will run at up to 4800 MT/s (PC5-38400) with CL40 timings at 1.1 V, providing registered ECC error correction for stable server workloads.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.