Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM 192GB (2x96GB) DDR5 6400 CL52 ECC RDIMM memory upgrade for Supermicro H14DSH

SKU CH-H22G-EE9DN

192 GB DDR5-6400 ECC registered DIMM kit (2 × 96 GB) validated for the Supermicro H14DSH motherboard

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for high-throughput performance
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation at 2Rx4 rank matches the motherboard memory controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DSH compatibility

192GB DDR5 ECC RDIMM kit for Supermicro H14DSH

This 192GB kit contains two 96GB DDR5 6400 RDIMM modules built to the exact rank, voltage and timing the Supermicro H14DSH memory controller expects. Registered ECC architecture offloads the controller and corrects single-bit errors on the fly, keeping production workloads stable at full capacity.

Upgrade from smaller or slower DDR5 RDIMM

The jump is worth it when your server needs the maximum supported capacity per slot and cannot tolerate silent data corruption. If the board is already populated with lower-density modules, replacing them with this 2Rx4 kit unlocks the full 192GB without mixing ranks or voltages.

Install by following the board manual population

The 288-pin RDIMM form factor fits only Registered DIMM slots, so verify the approved slot sequence before seating the modules. Common issues arise when installers ignore the population rules or mix registered and unbuffered memory, preventing the system from posting at rated speed.

Fordele

  • 192 GB total capacity from two 96 GB modules for dense server workloads
  • DDR5 6400 speed rated at CL52 latency for high-throughput performance
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation at 2Rx4 rank matches the motherboard memory controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DSH compatibility

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Spørgsmål om denne vare

Will the 288-pin RDIMM modules fit the Supermicro H14DSH memory slots?

Yes, the kit uses the 288-pin RDIMM form factor that the H14DSH requires, so each 96 GB module seats directly in the board's DDR5 DIMM sockets.

What is the correct installation sequence for the two 96 GB modules on this board?

Install the first module in the primary slot indicated by the H14DSH manual, then add the second module in the next recommended slot to satisfy the board's population rules for 2Rx4 registered DIMMs.

How long are the modules covered for replacement if a failure occurs?

The kit carries a lifetime replacement warranty, so either 96 GB module can be exchanged for the life of the product.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.