Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind

NEMIX RAM

NEMIX RAM 256GB (4x64GB) DDR5 4800 CL40 ECC RDIMM Supermicro H13SVW-NT-OS2 memory upgrade

SKU CH-TFCJ-QQZAY

A 256 GB DDR5 server memory kit with four 64 GB registered ECC modules running at 4800 MT/s CL40 and 1.1 V, built for the Supermicro H13SVW-NT-OS2 motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises full population
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-NT-OS2 memory slots precisely

256 GB DDR5-4800 ECC RDIMM kit for Supermicro

This kit delivers 256 GB (4 x 64 GB) of DDR5-4800 (PC5-38400) registered ECC memory. It matches the exact rank, voltage, and timing the motherboard's memory controller expects so every slot is recognized at full capacity and runs at its rated speed. It is built for servers and workstations that require registered DIMMs with error correction.

Straightforward 288-pin RDIMM installation

Each module is a standard 288-pin registered DIMM that seats in the board's DDR5 slots. The motherboard manual defines the approved DIMM population order; following that sequence avoids a no-post condition when all four slots are filled. No heat spreader is fitted, so clearance around the CPU cooler is not affected.

Verify supported capacity

Consult the Supermicro H13SVW-NT-OS2 manual for the maximum supported capacity per channel and the required installation sequence. The board requires registered ECC RDIMMs at 1.1 V; UDIMM or SODIMM modules will not work. Confirm your system's memory-population rules match this 4 x 64 GB configuration.

Fordele

  • 256 GB total capacity from four 64 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for the platform
  • Registered ECC architecture with 2Rx4 organisation corrects single-bit errors and stabilises full population
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-NT-OS2 memory slots precisely

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How can I confirm the kit is running at DDR5-4800 with CL40 after installation?

Enter the BIOS and verify the memory speed shows 4800 MT/s and CAS latency reads 40; the registered ECC design also allows the OS to report corrected-error counts as further proof of operation.

What is included in the package and what must I source separately?

The box contains the 256 GB kit as four 64 GB DDR5 288-pin RDIMM modules; no heat spreaders, cables, or tools are supplied, so have a compatible Supermicro H13SVW-NT-OS2 motherboard and anti-static wrist strap ready.

Which capacity version should I choose for a fully populated four-slot server?

Select this 256 GB (4 × 64 GB) 2Rx4 Registered ECC kit when your board's population rules call for four dual-rank modules at 1.1 V to reach maximum supported capacity.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.