Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 256GB 4x64GB 4800MHz CL40 1.1V 2Rx4 Supermicro H13SVW-N memory upgrade

SKU CH-B9GH-QX7K8

256GB DDR5-4800 ECC RDIMM kit (4×64GB, CL40, 1.1V, 2Rx4) validated for Supermicro H13SVW-N servers

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 256GB 4X64GB

Vis 12 flere konfigurationer

Speed 4800MHz

  • 256 GB total capacity from four 64 GB modules for maximum density
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-N memory slots precisely

Exact-match server upgrade

This 256GB kit delivers four 64GB DDR5 4800MHz registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13SVW-N motherboard expects. It is for administrators who need the full 256GB capacity recognised at rated speed without manual tuning. Buyers who want unbuffered UDIMMs or SODIMM form factors cannot use this kit.

DDR5 4800 interface limits

The modules run at 1.1V with CL40 latency on the 288-pin DDR5 registered interface, so the memory controller sees a consistent electrical load across all populated slots. Registered buffering lets every slot run fully populated at the rated 4800MT/s, while on-die ECC corrects single-bit errors before they reach the OS. Systems that require a different voltage, latency or unbuffered topology will not post with these DIMMs.

Four-slot installation

Each 2Rx4 module seats in a standard 288-pin DDR5 RDIMM slot; the kit contains exactly four sticks for a complete population. The motherboard manual dictates the required slot order and any BIOS settings for full-capacity operation. Skipping the manual's population sequence is the most common reason the system reports less than 256GB or fails to boot.

Fordele

  • 256 GB total capacity from four 64 GB modules for maximum density
  • DDR5 4800 MHz speed with CL40 latency delivers rated throughput
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 10 V operation matches the motherboard's voltage requirement exactly
  • 288-pin RDIMM form factor fits the Supermicro H13SVW-N memory slots precisely

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I pick the 256 GB kit or a smaller capacity for the Supermicro H13SVW-N?

The 256 GB kit fills four slots with 64 GB modules. Choose it only if your motherboard manual confirms support for that total capacity and the required population order.

Will the DDR5-4800 speed run at 4800 MHz once installed?

Yes, the modules are rated for DDR5-4800 (PC5-38400) and the board's memory controller will recognise the exact rank, voltage and timing to operate at that speed.

Does the 288-pin RDIMM interface limit how many modules I can install?

The 288-pin Registered RDIMM form factor is what the H13SVW-N requires. Population limits are defined by the motherboard manual, not by the module interface itself.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.