Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-WFB1-NAGBD

Six 96 GB DDR5 registered ECC modules run at 4800 MT/s with CL40 timing and 1.1 V for the Supermicro H13SVW-N motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Vis 12 flere konfigurationer

Speed 4800MHz

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13SVW-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin DDR5 RDIMM form factor fits the required slots without adapters

Exact-Match Server Upgrade

This 576 GB kit delivers six 96 GB DDR5 4800 RDIMMs built to the Supermicro H13SVW-N motherboard's exact rank, voltage and timing requirements. Registered ECC architecture ensures every slot is recognised at full capacity and runs at the rated 4800 MT/s speed. It targets administrators who need maximum supported memory without trial-and-error configuration.

Sustained Load Stability

Registered buffering offloads the memory controller so all six modules operate fully populated under continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during extended production runs. The 1.10 V operating voltage keeps power draw predictable across long duty cycles.

Installation Guidance

The 288-pin RDIMM form factor matches the board's required slot type; UDIMM or SODIMM modules will not fit. Population order and maximum per-channel limits vary by BIOS revision, so the system manual must be consulted before seating the DIMMs. No heat spreaders are present, simplifying clearance in dense chassis.

Fordele

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13SVW-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin DDR5 RDIMM form factor fits the required slots without adapters

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

How much heat and power should I expect from six 96 GB DDR5 4800 CL40 1.1 V registered ECC modules running continuously?

Each module operates at 1.1 V with a CL40 DDR5-4800 profile; registered buffering reduces electrical load on the memory controller, so a fully populated server chassis with adequate airflow handles the thermal output without extra cooling.

What motherboard and CPU combination do I already need for this 6 x 96 GB DDR5 4800 RDIMM kit to function?

A Supermicro H13SVW-N motherboard with a CPU that supports DDR5-4800 registered ECC memory and six 288-pin RDIMM slots populated in the order specified by the board manual.

Will this 576 GB DDR5 4800 CL40 2Rx4 registered ECC kit work alongside any existing DDR5 RDIMMs I keep in the same server?

Mixing is only reliable when the other modules are also DDR5-4800 CL40 1.1 V 2Rx4 registered ECC; different speeds, ranks, voltages or latencies will force the memory controller to down-clock or disable slots.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.