Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

NEMIX RAM

NEMIX RAM 576GB 6x96GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-WFB1-NAGBD

Six 96 GB DDR5 registered ECC modules run at 4800 MT/s with CL40 timing and 1.1 V for the Supermicro H13SVW-N motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13SVW-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin DDR5 RDIMM form factor fits the required slots without adapters

Exact-Match Server Upgrade

This 576 GB kit delivers six 96 GB DDR5 4800 RDIMMs built to the Supermicro H13SVW-N motherboard's exact rank, voltage and timing requirements. Registered ECC architecture ensures every slot is recognised at full capacity and runs at the rated 4800 MT/s speed. It targets administrators who need maximum supported memory without trial-and-error configuration.

Sustained Load Stability

Registered buffering offloads the memory controller so all six modules operate fully populated under continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots during extended production runs. The 1.10 V operating voltage keeps power draw predictable across long duty cycles.

Installation Guidance

The 288-pin RDIMM form factor matches the board's required slot type; UDIMM or SODIMM modules will not fit. Population order and maximum per-channel limits vary by BIOS revision, so the system manual must be consulted before seating the DIMMs. No heat spreaders are present, simplifying clearance in dense chassis.

Pluspunten

  • 576 GB total capacity from six 96 GB modules for dense server workloads
  • DDR5 4800 speed with CL40 latency delivers rated throughput for Supermicro H13SVW-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full-slot population
  • 1 V operation matches the motherboard's memory controller specification exactly
  • 288-pin DDR5 RDIMM form factor fits the required slots without adapters

Specificaties

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How much heat and power should I expect from six 96 GB DDR5 4800 CL40 1.1 V registered ECC modules running continuously?

Each module operates at 1.1 V with a CL40 DDR5-4800 profile; registered buffering reduces electrical load on the memory controller, so a fully populated server chassis with adequate airflow handles the thermal output without extra cooling.

What motherboard and CPU combination do I already need for this 6 x 96 GB DDR5 4800 RDIMM kit to function?

A Supermicro H13SVW-N motherboard with a CPU that supports DDR5-4800 registered ECC memory and six 288-pin RDIMM slots populated in the order specified by the board manual.

Will this 576 GB DDR5 4800 CL40 2Rx4 registered ECC kit work alongside any existing DDR5 RDIMMs I keep in the same server?

Mixing is only reliable when the other modules are also DDR5-4800 CL40 1.1 V 2Rx4 registered ECC; different speeds, ranks, voltages or latencies will force the memory controller to down-clock or disable slots.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.