Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green rectangular DDR4 RDIMM module, 288 gold pins, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB DDR4 2666 ECC RDIMM 2Rx4 CL19 1.2V 288-Pin memory upgrade

SKU CH-14QK-G1W0J

32 GB DDR4 2666 ECC registered RDIMM with CL19 latency at 1.2 V for compatible ASRock EPYC server boards

  • Capacity32GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V

Capacity 32GB

  • 32 GB capacity handles heavy server workloads
  • ECC registered design protects data integrity under load
  • DDR4 2666 speed matches EPYC platform specs
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible ASRock boards

32 GB DDR4 ECC RDIMM for ASRock EPYC servers

This single 32 GB registered DIMM delivers DDR4 2666 speed with ECC protection for ASRock Rack ROMED8-2T motherboards running AMD EPYC processors. It targets administrators who need to expand memory capacity in compatible server platforms. The module operates at 1.2 V with CL19 latency.

Upgrade from smaller or non-ECC DIMMs

Replacing lower-capacity unbuffered or non-ECC modules with this registered ECC RDIMM adds error correction and higher density per slot. The jump is worth it when the motherboard requires registered memory and the workload demands data integrity at scale.

Handles 32 GB per slot in 2Rx4 organisation

The 2Rx4 rank structure fits the board's memory topology and supports typical virtualisation and database workloads. Capacity runs out when the application working set exceeds the total installed memory across all populated slots.

Fordele

  • 32 GB capacity handles heavy server workloads
  • ECC registered design protects data integrity under load
  • DDR4 2666 speed matches EPYC platform specs
  • 2 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits compatible ASRock boards

Specifikationer

BrandNEMIX RAM
SeriesASRock Server Motherboard Compatible Series Memory
ModelASRock DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR21300-324K1
Capacity32GB
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemASRock
CAS LatencyCL19
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2666MHZ PC4-21300 2Rx4 1.2V CL19 288-PIN ECC RDIMM Registered Server Memory

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Will the 288-pin DDR4 RDIMM fit the DIMM slots on my ASRock Rack ROMED8-2T motherboard?

Yes, the module is a 288-pin DDR4 RDIMM built to the standard server form factor used by the ROMED8-2T, so it seats directly into the board's registered DIMM slots.

What is the correct way to seat this 2Rx4 registered module, and what step do installers often miss?

Power down, open the slot ejectors, align the module's off-centre notch with the slot key, press firmly until both ejectors click shut, then verify in BIOS that the full 32 GB appears at 2666 MT/s with ECC active.

How can I tell when this ECC RDIMM should be replaced?

Monitor the system logs for rising correctable-error counts or repeated uncorrectable errors; a sustained increase signals the module should be swapped out.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.