Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green printed circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 32GB DDR4 2933 PC4-23400 CL21 2Rx4 1.2V 288-Pin ECC RDIMM Dell PowerEdge R740xd memory upgrade

SKU CH-WTQ2-KQXDC

Adds 32 GB of DDR4-2933 ECC registered memory to a Dell PowerEdge R740xd server

  • Capacity32GB
  • SpeedDDR4 2933 (PC4 23400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB DDR4 2933 MHz capacity for demanding server workloads
  • ECC registered design protects data integrity in mission-critical environments
  • Dell PowerEdge R740xd validated compatibility ensures reliable operation
  • 2 V low-voltage operation reduces power draw per module
  • 2Rx4 288-pin RDIMM form factor fits standard server memory slots

32GB DDR4 ECC RDIMM for Dell R740xd

This 32GB DDR4 2933 module is built for Dell PowerEdge R740xd rack servers. It delivers registered ECC reliability for mission-critical workloads. The single-rank 2Rx4 design operates at 1.2V without a heat spreader. IT teams can install it quickly to expand server memory capacity.

Suits Dell R740xd upgrades; not for non-ECC systems

Administrators upgrading a PowerEdge R740xd will match factory specifications exactly. The registered DDR4 design requires a compatible server chipset. Builders needing non-ECC memory for desktops or workstations should look elsewhere. Systems that cannot accept registered DIMMs will not support this module.

Registered ECC DDR4 2933 CL21 at 1.2V

The registered ECC DDR4 2933 CL21 specification at 1.2V determines compatibility with the Dell PowerEdge R740xd memory controller. This voltage and latency profile matches the server's qualified vendor list. Verifying the registered ECC requirement against the system manual confirms the correct part.

Fordele

  • 32 GB DDR4 2933 MHz capacity for demanding server workloads
  • ECC registered design protects data integrity in mission-critical environments
  • Dell PowerEdge R740xd validated compatibility ensures reliable operation
  • 2 V low-voltage operation reduces power draw per module
  • 2Rx4 288-pin RDIMM form factor fits standard server memory slots

Specifikationer

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 2933MHZ RDIMM Registered Server Memory
Part NumberMR23400-324K1
Capacity32GB
SpeedDDR4 2933 (PC4 23400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR4 2933MHZ PC4-23400 2Rx4 1.2V CL21 288-PIN ECC RDIMM Registered Server Memory

Spørgsmål om denne vare

Does the 288-pin RDIMM fit the Dell PowerEdge R740xd memory slots?

Yes, the 288-pin DDR4 RDIMM form factor matches the R740xd DIMM sockets exactly.

What is the correct order for seating this registered ECC module in the server?

Power down, open the chassis, align the notch, press firmly until both ejector clips click, then verify in BIOS that 2933 MT/s and ECC are active.

When should the 32 GB 2Rx4 module be replaced or checked for errors?

Run the built-in memory diagnostics after any uncorrected ECC event or if the system logs report correctable-error thresholds being exceeded.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.