Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Green 288-pin DDR5 RDIMM module with black memory chips and gold contacts

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 1.1V 2Rx8 RDIMM ECC memory upgrade

SKU CH-ANR5-DDESH

32 GB DDR5 RDIMM running at 5600 MT/s with CL46 latency, 2Rx8 registered ECC, and 1.1 V operation for Supermicro H13SSF servers

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 32 GB DDR5 capacity expands server memory headroom
  • 5600 MT/s speed with CL46 latency keeps data flowing
  • 10 V operation reduces power draw per module
  • 2Rx8 registered ECC architecture protects against silent data errors
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboards

Compatible Supermicro H13SSF Upgrade

This 32 GB DDR5 module is an exact-match upgrade for the Supermicro H13SSF motherboard. It arrives new and ready for server deployments that require registered ECC memory.

Registered ECC RDIMM Requirement

The board only accepts 288-pin DDR5 RDIMMs with a registered buffer and ECC; UDIMM or SODIMM variants will not function. This kit matches the required 2Rx8 rank, 1.10 V voltage and CL46 latency so the memory controller recognises full capacity at the rated 5600 MT/s speed.

Straightforward Slot Installation

Align the notch on the 288-pin edge connector with the motherboard key, press firmly until the retention clips latch, then verify population order in the system manual. The most common issue is mixing registered and unbuffered modules or skipping the approved slot sequence, which prevents the server from posting.

Fordele

  • 32 GB DDR5 capacity expands server memory headroom
  • 5600 MT/s speed with CL46 latency keeps data flowing
  • 10 V operation reduces power draw per module
  • 2Rx8 registered ECC architecture protects against silent data errors
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboards

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Spørgsmål om denne vare

What does the 5600MHz speed mean once the module is installed in a Supermicro H13SSF?

The module will run at its rated DDR5-5600 (PC5-44800) data rate with CL46 latency, provided the motherboard memory controller supports that speed and the DIMM population rules are followed.

How does the registered ECC interface affect real-world operation?

Registered buffering reduces electrical load on the memory controller so every slot can be fully populated at 32GB, while ECC detects and corrects single-bit errors on the fly to prevent silent data corruption.

What physical slot and clearance does this 288-pin RDIMM need?

It requires a standard 288-pin DDR5 RDIMM slot on the Supermicro H13SSF; the module has no heat spreader, so it fits in tight server chassis without extra height clearance.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.