Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 384GB 6x64GB DDR5 5600 PC5-44800 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13SST-GC

SKU CH-626B-N702A

A 384 GB DDR5 server memory kit of six 64 GB registered ECC RDIMMs running at 5600 MT/s with CL46 latency and 1.1 V operation, validated for the Supermicro H13SST-GC motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Vis 24 flere konfigurationer
  • 384 GB total capacity from six 64 GB modules for dense server workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth on Supermicro H13SST-GC
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at CL46 matches the motherboard's voltage and timing requirements
  • 288-pin RDIMM form factor fits the board's memory slots and population rules

Exact-Match Server Upgrade

This NEMIX RAM kit provides 384GB across six 64GB DDR5 5600 PC5-44800 registered ECC RDIMMs. It is built for administrators upgrading a Supermicro H13SST-GC motherboard to its full supported capacity with modules that match the board's required rank, voltage and timing.

DDR5 Registered Interface Limits

DDR5 5600 RDIMMs operate at 1.1V with a CL46 latency and 2Rx4 organisation. The registered buffer reduces electrical load on the memory controller, allowing all slots to run fully populated at the rated 5600MT/s speed. ECC corrects single-bit errors but the interface does not support unbuffered or SODIMM form factors.

Installation Guidance

Each 288-pin module keys into the board's DDR5 RDIMM slots in the order specified by the Supermicro manual. Population rules for six DIMMs must be followed exactly or the system will not recognise the full 384GB. No heat spreaders are fitted so airflow across the chips must be maintained by the chassis fans.

Fordele

  • 384 GB total capacity from six 64 GB modules for dense server workloads
  • DDR5 5600 speed (PC5-44800) delivers rated bandwidth on Supermicro H13SST-GC
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1 V operation at CL46 matches the motherboard's voltage and timing requirements
  • 288-pin RDIMM form factor fits the board's memory slots and population rules

Specifikationer

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Andre versioner af denne model

5 flere i samme serie

Samme familie, men med anden hukommelse, køler eller clockfrekvens — sammenlign, før du bestemmer dig.

Spørgsmål om denne vare

Should I choose the 384 GB kit or a smaller capacity for my Supermicro H13SST-GC?

The 384 GB kit provides six 64 GB modules that fill the board's slots for maximum registered ECC capacity. Choose it when your workloads need the full 384 GB; otherwise select a smaller kit that matches your actual memory requirement.

What does the 5600 MT/s speed mean once the modules are installed in the server?

The DDR5-5600 rating means each module transfers data at 5600 million transfers per second, delivering PC5-44800 bandwidth when the memory controller runs them at the rated CL46 latency and 1.1 V.

How does the 288-pin RDIMM interface limit performance in this platform?

The 288-pin registered DIMM interface is required by the Supermicro H13SST-GC; it caps the memory to DDR5-5600 operation with ECC and registered buffering, preventing use of faster or unbuffered module types.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.