Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Four green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 64GB (4×16GB) DDR4 3200 ECC UDIMM CL22 memory upgrade

SKU CH-7RWD-2996Y

A 64GB kit of four 16GB DDR4 3200 ECC UDIMM modules with CL22 latency and 1.2V operation for Supermicro systems

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit expands server capacity
  • DDR4 3200 speed accelerates data throughput
  • ECC protection guards against data corruption
  • 2 V operation reduces power draw
  • Validated for Supermicro M12SWA-TF compatibility

Capacity and fit

This NEMIX RAM kit delivers 64 GB across four 16 GB DDR4 ECC UDIMM modules. It is built for Supermicro servers and workstations that require unbuffered error-correcting memory at 3200 MT/s.

Upgrade path

The kit replaces lower-capacity or non-ECC DDR4 UDIMMs in compatible Supermicro systems. The jump is worthwhile when workloads demand both higher total memory and the data-integrity protection that ECC provides.

Installation notes

Modules use the standard 288-pin DDR4 UDIMM form factor and operate at 1.2 V without heat spreaders. Installation follows the motherboard manual; the main risk is populating slots in an order the board does not support for 2Rx8 ranks.

Fordele

  • 64 GB kit expands server capacity
  • DDR4 3200 speed accelerates data throughput
  • ECC protection guards against data corruption
  • 2 V operation reduces power draw
  • Validated for Supermicro M12SWA-TF compatibility

Specifikationer

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC Unbuffered UDIMM
Part NumberME25600-628K4
Capacity64GB (4 x 16GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 ECC UDIMM
Rank2Rx8
FeaturesDDR4 ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC Unbuffered UDIMM KIT

Spørgsmål om denne vare

Will the 288-pin DDR4 UDIMM modules fit a SuperMicro M12SWA-TF motherboard?

Yes, the kit is built for that board and uses the standard 288-pin DDR4 UDIMM form factor.

Do I need to enable ECC in the BIOS after installing the 2Rx8 CL22 modules?

Install the four 16 GB sticks, then enter the BIOS and turn on ECC support so the 2Rx8 CL22 modules can correct errors.

When should I expect to replace the 1.2 V DDR4 3200 kit?

DDR4 memory rarely fails; replace only if a module develops errors or you upgrade to a platform that requires DDR5.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.