Vi tager imod kryptovaluta — så den krypto, du ejer, kan købe rigtig hardware.Betal med krypto, brug det på rigtig hardware. Gratis, forsikret levering til hele verden ved køb over 399 $. Neutrale, umærkede papkasser, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Din kurs låses i 30 minutter, så snart kassen åbner.Kurs låst i 30 minutter. Hver vare er forseglet, har kontrolleret serienummer og er dækket af 24 måneders garanti.Forseglet, 24 måneders garanti.

Prisvagt Log ind
Six green DDR4 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 768GB (6x128GB) DDR4 3200 CL22 4Rx4 ECC RDIMM ThinkMate memory upgrade

SKU CH-88EM-PNP13

A 768GB registered DDR4 3200 ECC kit of six 128GB modules at CL22 for ThinkMate servers

  • Capacity768GB (6 x 128GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 768GB total capacity from six 128GB modules for large memory workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
  • ECC registered RDIMM design detects and corrects errors to protect data integrity
  • 2V operation reduces power draw in dense server configurations
  • Validated for ThinkMate HDX-XN24-52S3, HDX-XN24-32S3, HDX-XN12-52S3, HDX-XN12-32S3 systems

Capacity and fit

This NEMIX RAM kit delivers 768GB through six 128GB DDR4 3200 registered DIMMs built for ThinkMate HDX servers. The modules run at 1.2V with CL22 latency and a 4Rx4 organisation. Each stick is a 288-pin RDIMM with ECC and no heat spreader.

Who this suits and who should look elsewhere

IT teams running memory-intensive workloads on the listed ThinkMate HDX-XN24 or HDX-XN12 models can populate all twelve slots with two of these kits. Buyers who need a different capacity, a different speed grade, or unbuffered UDIMMs for a workstation board should look elsewhere. Systems that only accept single-rank or dual-rank modules will not support these 4Rx4 parts.

Deciding specification

The 4Rx4 rank structure is the single detail that decides compatibility. A motherboard qualified for 4Rx4 RDIMMs at DDR4 3200 will accept the kit; a board limited to 1Rx4, 2Rx4 or 2Rx8 ranks will not. Check the server’s qualified-vendor list before ordering.

Fordele

  • 768GB total capacity from six 128GB modules for large memory workloads
  • DDR4 3200 speed with PC4-25600 bandwidth for fast data throughput
  • ECC registered RDIMM design detects and corrects errors to protect data integrity
  • 2V operation reduces power draw in dense server configurations
  • Validated for ThinkMate HDX-XN24-52S3, HDX-XN24-32S3, HDX-XN12-52S3, HDX-XN12-32S3 systems

Specifikationer

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-744K6
Capacity768GB (6 x 128GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content768GB (6X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Spørgsmål om denne vare

How do I install the 6x128GB DDR4 3200 CL22 4Rx4 ECC RDIMM modules in my ThinkMate server and which step is commonly missed?

Power down the server, open the chassis, align each 288-pin module with the DIMM slot key notch, press firmly until the retention clips lock on both ends, then populate all six slots following the motherboard population guide; the step often missed is verifying the correct channel order for 4Rx4 registered modules in the manual.

What maintenance or replacement will the 768GB DDR4 3200 ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no scheduled maintenance is required; replacement is only needed if a module fails ECC error correction or the server is upgraded to a platform that does not support DDR4 3200 4Rx4 registered memory.

What is the first limit that appears when the 6x128GB DDR4 3200 CL22 4Rx4 ECC RDIMM kit runs under sustained load?

The primary limit is the CL22 latency at 3200 MT/s, which sets the minimum access delay; sustained heavy workloads will encounter this timing boundary before bandwidth or voltage constraints become limiting factors.

Også på denne hylde

Kunderne har også sammenlignet disse

Samme hylde, samme kasse — otte mønter og 30 minutters kurslås.